Airtac SC32 Standard Cylinder SC32X75TC
The AirTAC Airtac SC32 Standard Cylinder SC32X75TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X75TC
The SC32X75TC is a compact double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). With a 12 mm diameter piston rod and a 21 mm adjustable air cushion, it provides smooth deceleration in a 75 mm stroke format suited for light clamping and sorting tasks.
This model features a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC32TC), allowing the cylinder body to pivot during operation. The total extended body length is 215 mm, built on a tie-rod design with PT1/8 ports and an M10x1.25 rod thread.
Airtac SC32 Standard Cylinder SC32X75TC Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X75TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X75TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X75TC Is Used
Small Part Diverting
The 75 mm stroke and pivoting trunnion mount suit light-duty conveyor gates or flippers, where the 402 N push force at 0.5 MPa easily redirects small packages.
Clamping Fixtures
Ideal for jigs requiring a pivoting cylinder. The 12 mm rod and adjustable cushion provide controlled, repeatable clamping without impact damage to delicate components.
Linkage Actuation
The centre trunnion mount allows the cylinder to swing, making it suitable for actuating levers or linkages in packaging machinery where space is limited.
Is the Airtac SC32 Standard Cylinder SC32X75TC the Right Cylinder?
Choose the SC32 bore for push forces up to 724 N at 0.9 MPa. If your load requires more force, step up to the SC40 bore which provides 628 N at 0.5 MPa. The 75 mm stroke is well within the 1000 mm maximum standard stroke for this bore.
For replacement, match five points: 32 mm bore, 75 mm stroke, PT port thread, centre trunnion (TC) mount, and the absence of a magnet. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X75TC FAQ
At 0.5 MPa air pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
No. The SC series is a tie-rod cylinder and its body dimensions are shorter than an ISO 15552 profile. Mounting accessories are specific to the SC series; this model uses the F-SC32TC centre trunnion and TCM1 bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X75TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.