The AirTAC Airtac SC32 Standard Cylinder SC32X760 is a genuine double-acting standard air cylinder with a Ø32mm bore and 760mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X760 is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). With a 32 mm bore and a long 760 mm stroke, it is built for applications requiring extended linear reach from a compact body profile. The 12 mm diameter piston rod and 21 mm adjustable air cushion help manage end-of-stroke deceleration.
This model uses a PT1/8 port and M10x1.25 rod thread, with a body length A of 140 mm. The total extended length reaches approximately 900 mm. As a genuine AirTAC SC series cylinder, it features a durable tie-rod construction that is shorter than an ISO 15552 profile, making it suitable where space is constrained but reliable pneumatic actuation is essential.
| Model | Airtac SC32 Standard Cylinder SC32X760 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes or pulls lightweight components across a 760 mm span on packaging or assembly conveyors, where the 402 N force handles sliding loads with minimal friction.
Advances strip, web, or sheet material through a processing station with a consistent 760 mm step, using the adjustable cushion to stop smoothly at each index point.
Opens and closes lightweight louvers or gates in agricultural ventilation systems, leveraging the long stroke for full travel and the tie-rod design for dusty environments.
Choose the SC32X760 when your application needs a light-duty push force of 402 N at standard plant pressure and a long 760 mm working stroke. If you require higher force, stepping up to the SC40 bore provides 628 N at the same 0.5 MPa. For strokes of this length, ensure the rod is protected from side loads; an external linear guide or rod support is recommended to prevent bending and premature seal wear on the 12 mm rod. When replacing an existing cylinder, match the 32 mm bore, 760 mm stroke, PT1/8 port thread, basic mounting configuration, and confirm whether the original used a magnet.
Quick checklist
At 0.5 MPa the push force is 402 N, and at the maximum operating pressure of 0.9 MPa it reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The 12 mm rod is not designed for unsupported side loads, especially at a 760 mm stroke. You must use an external linear guide or rod support to absorb lateral forces and prevent rod bending or seal damage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.