Airtac SC32 Standard Cylinder SC32X790
The AirTAC Airtac SC32 Standard Cylinder SC32X790 is a genuine double-acting standard air cylinder with a Ø32mm bore and 790mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke790 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X790
The AirTAC SC32X790 is a double-acting tie-rod cylinder with a 32 mm bore and a 790 mm stroke, delivering a push force of 402 N at 0.5 MPa (up to 724 N at 0.9 MPa). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for medium-length linear moves.
This model uses PT1/8 ports and a standard TPU seal, operating from -20 to +70 °C. The body length A is 140 mm, giving a total extended length of approximately 930 mm. It is a genuine AirTAC SC-series cylinder, designed for compact pneumatic applications where a shorter overall length than an ISO 15552 cylinder is beneficial.
Airtac SC32 Standard Cylinder SC32X790 Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X790 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 790 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X790
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×790 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X790 Is Used
Material Sorting Gates
Actuates diverter gates on small-package conveyor lines, using the 790 mm stroke to sweep items between lanes with 402 N of push force.
Automated Labeling
Positions a labeling head across a 790 mm wide product bed, leveraging the adjustable cushion for smooth, precise stops without jarring the applicator.
Box Flap Tucking
Extends a tucking arm deep into a case packer, folding cardboard flaps with controlled force and decelerating gently at the end of the 790 mm stroke.
Is the Airtac SC32 Standard Cylinder SC32X790 the Right Cylinder?
Choose the SC32X790 when your application needs roughly 400 N of push force at standard plant pressure. If you require more force, stepping up to the SC40 bore delivers 628 N at the same 0.5 MPa. For strokes of this length, ensure the 12 mm rod is adequately supported against side loads; an external linear guide is recommended to prevent rod bending and premature bearing wear.
To replace an existing cylinder, match five points exactly: 32 mm bore, 790 mm stroke, PT1/8 port thread, basic (no) mounting, and no built-in magnet. This SC model is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X790 FAQ
At 0.7 MPa operating pressure, the SC32X790 produces a push force of 563 N. The maximum push force at the 0.9 MPa upper limit is 724 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. It directly replaces another AirTAC SC32 cylinder with the same stroke, port, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X790
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.