Airtac SC32 Standard Cylinder SC32X80
The AirTAC Airtac SC32 Standard Cylinder SC32X80 is a genuine double-acting standard air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X80
The AirTAC SC32X80 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa, making it well-suited for light clamping and sorting tasks. Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide smooth deceleration at end-of-stroke.
With an 80 mm stroke and a body length A of 140 mm, this cylinder fits neatly into space-constrained fixtures. The PT1/8 port and M10x1.25 rod thread are standard for the 32 mm bore, ensuring straightforward pneumatic integration.
Airtac SC32 Standard Cylinder SC32X80 Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X80 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X80
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X80 Is Used
Small Part Clamping
Ideal for light-duty clamping fixtures in electronics or medical device assembly where controlled, repeatable force is needed.
Sorting Gates
Actuates small diverter gates on conveyor lines, handling lightweight packages with the 402 N push force at standard shop air.
Test Stand Actuation
Provides reliable linear motion in benchtop test fixtures, cycling components with a 12 mm rod and 21 mm cushion for smooth operation.
Is the Airtac SC32 Standard Cylinder SC32X80 the Right Cylinder?
For applications needing more force, consider stepping up to the SC40 series, which provides 628 N push at 0.5 MPa. The SC32X80 is a standard-stroke model within the 1000 mm maximum for this bore. When replacing an existing unit, match bore, stroke, PT port thread, and basic mounting configuration to ensure a direct fit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X80 FAQ
At 0.7 MPa operating pressure, the SC32X80 produces 563 N of push force. The maximum push force at 0.9 MPa is 724 N.
No. The SC series is a tie-rod cylinder with a shorter body length than ISO 15552 cylinders. It is not dimensionally interchangeable. Replace only with another AirTAC SC32 cylinder of the same stroke and port configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.