The AirTAC Airtac SC32 Standard Cylinder SC32X800 is a genuine double-acting standard air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X800 is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion make it suitable for moderate-speed linear tasks requiring end-of-stroke deceleration.
With an 800 mm stroke, this model stays within the 1000 mm maximum standard stroke for the 32 mm bore. The compact body length A of 140 mm helps fit the cylinder into tight machine envelopes, while the PT1/8 port thread ensures straightforward pneumatic connections.
| Model | Airtac SC32 Standard Cylinder SC32X800 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 800 mm stroke and 402 N push force at 0.5 MPa reliably actuate diverter gates on compact conveyor lines, directing lightweight packages without excessive air consumption.
Extends a labeling head across an 800 mm reach. The adjustable cushion prevents impact shock at the end of stroke, protecting sensitive label-application tooling.
Moves a sampling probe linearly in a test rig. The tie-rod design allows easy maintenance, and the filtered-air requirement suits clean lab environments.
For applications needing more force, stepping up to the 40 mm bore provides 628 N at 0.5 MPa. At an 800 mm stroke, ensure the load is guided externally; the 12 mm rod can bend under side loads, so use a linear guide or rod-alignment coupler to protect the rod bearing and seals.
When replacing an existing cylinder, match five points: 32 mm bore, 800 mm stroke, PT port thread, basic (no mounting accessory), and no magnet. This ensures the tie-rod mounting dimensions and port locations align with the original AirTAC SC unit.
Quick checklist
At 0.7 MPa supply pressure, the SC32X800 produces 563 N of push force. The theoretical maximum force at 1.0 MPa is 82 kgf, but the operating pressure range is 0.15–1.0 MPa.
It is not recommended. At 800 mm stroke, the 12 mm rod is susceptible to bending under side loads. Always use an external guide rail or rod-alignment coupler to prevent premature rod bearing wear and seal failure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.