Airtac SC32 Standard Cylinder SC32X800S
The AirTAC Airtac SC32 Standard Cylinder SC32X800S is a genuine double-acting standard air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke800 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X800S
The SC32X800S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). Its 32 mm bore houses a 12 mm diameter piston rod, and the 800 mm stroke suits long-reach linear actuation tasks. The built-in magnet (-S suffix) allows direct mounting of CMSG, DMSG, or EMSG sensors on the barrel for contactless position feedback.
This tie-rod cylinder features an adjustable pneumatic cushion (21 mm length) to decelerate the piston smoothly at stroke ends. Operating on 0.15-1.0 MPa filtered air, it uses PT1/8 ports and an M10x1.25 rod thread. The body length A is 140 mm, giving a total extended length of approximately 940 mm. Temperature range is -20 to +70 °C with the standard TPU seals.
Airtac SC32 Standard Cylinder SC32X800S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X800S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X800S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X800S Is Used
Material Sorting Gates
The 800 mm stroke and magnetic piston sensing make this cylinder ideal for long-travel diverter gates on conveyors, where end-of-stroke confirmation is required for cycle sequencing.
Automated Test Fixtures
Delivers consistent 402 N force for push-pull testing or component insertion. The sensor-ready barrel enables precise position verification at both ends of the 800 mm stroke.
Long-Reach Pushers
Pushes cartons or totes across wide roller beds. The adjustable cushion protects the cylinder and load from impact shock at the end of the 800 mm travel.
Is the Airtac SC32 Standard Cylinder SC32X800S the Right Cylinder?
Choose the SC32 bore for light-duty positioning and clamping where forces under 724 N are sufficient. If your application requires more push force, step up to the SC40 bore, which provides 628 N at 0.5 MPa. For this 800 mm stroke, ensure the rod is guided externally if any side load is present—the 12 mm rod is slender and can bend under lateral force. For exact replacement, match bore (32 mm), stroke (800 mm), PT1/8 port thread, the built-in magnet (-S), and basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X800S FAQ
At 0.5 MPa air pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston, allowing AirTAC CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel. This provides non-contact end-of-stroke or mid-stroke position sensing without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.