The AirTAC Airtac SC32 Standard Cylinder SC32X800STC is a genuine double-acting standard air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X800STC is a double-acting single-rod pneumatic cylinder with a 32 mm bore and an 800 mm stroke, providing 402 N of push force at 0.5 MPa. This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and ships with a centre trunnion (TC suffix) and TCM1 bracket for pivoting applications.
With a 12 mm diameter piston rod and M10x1.25 rod thread, the cylinder body length (A) is 140 mm, giving an approximate extended length of 940 mm. The adjustable pneumatic cushion (21 mm length) decelerates the piston at stroke ends to reduce impact. PT1/8 ports and TPU seals with a -20 to +70 °C operating range are standard on this configuration.
| Model | Airtac SC32 Standard Cylinder SC32X800STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 800 mm stroke and 32 mm bore suit conveyor diverters or sorting gates where a compact tie-rod cylinder with sensor feedback is needed.
Delivers consistent 402 N push force for clamping or pressing small components, with trunnion mounting allowing the cylinder to pivot freely.
The built-in magnet and adjustable cushion make this cylinder ideal for lab automation requiring precise end-of-stroke sensing and smooth deceleration.
Choose the SC32 bore for light-to-medium pneumatic tasks needing up to 724 N of thrust at the maximum operating pressure of 0.9 MPa. If your application requires higher force, step up to the SC40 bore, which provides 628 N at 0.5 MPa. For this 800 mm stroke, ensure the rod is protected from side loads; external linear guides or a self-guided cylinder are recommended to prevent rod bending and premature bearing wear.
To replace an existing cylinder, match these five points: 32 mm bore, 800 mm stroke, PT1/8 port thread, centre trunnion (TC) mount with TCM1 bracket (F-SC32TC), and the built-in magnet (-S) for sensor compatibility. This tie-rod cylinder is shorter than an ISO 15552 design and is not dimensionally interchangeable with that standard.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet. This allows you to directly clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors onto the barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.