Airtac SC32 Standard Cylinder SC32X80CA
The AirTAC Airtac SC32 Standard Cylinder SC32X80CA is a genuine double-acting standard air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X80CA
The SC32X80CA is a double-acting single-rod pneumatic cylinder with a 32 mm bore and 80 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the maximum operating pressure of 0.9 MPa). Its compact tie-rod body has a length A of 140 mm, resulting in a total extended length of approximately 220 mm.
This model is configured with a rear single clevis (CA) mount, part F-SC32CA, which allows the cylinder to pivot during operation, ideal for applications where the load follows an arc. The 12 mm diameter rod features an M10x1.25 thread, and the adjustable air cushion (21 mm) decelerates the piston smoothly at stroke end.
Airtac SC32 Standard Cylinder SC32X80CA Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X80CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X80CA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X80CA Is Used
Small-Part Diverter
The pivoting rear clevis mount and 80 mm stroke suit light conveyor diverters, pushing small packages onto a secondary line with 402 N of force at standard plant pressure.
Clamping Fixture
Delivers 724 N of clamping force at 0.9 MPa for holding workpieces in CNC or assembly jigs, with an adjustable cushion to reduce impact and vibration.
Hopper Gate Actuator
Operates a small sliding gate on a seed or grain hopper. The clevis mount accommodates the slight arc of a manual lever linkage, and the 32 mm bore fits tight machinery spaces.
Is the Airtac SC32 Standard Cylinder SC32X80CA the Right Cylinder?
For higher force, step up to the SC40 (628 N push at 0.5 MPa); for a lighter, more compact option, the SC32 remains the smallest bore in the SC family. The 80 mm stroke is a standard length and does not require external guides for purely axial loads, but any side loading must be managed.
When replacing an existing cylinder, match five points: 32 mm bore, 80 mm stroke, PT1/8 port thread, rear clevis mounting (CA), and the absence of a magnet. This ensures identical fit and performance to another AirTAC SC32 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X80CA FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. This model comes with a rear single clevis (CA), but you can order other AirTAC SC32 mounting accessories like foot (LB), front flange (FA), or rear double clevis (CB) separately. Ensure the replacement cylinder matches the 32 mm bore, 80 mm stroke, and PT1/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X80CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.