Airtac SC32 Standard Cylinder SC32X80N
The AirTAC Airtac SC32 Standard Cylinder SC32X80N is a genuine double-acting standard air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X80N
The SC32X80N is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 80 mm stroke is a standard length for the 32 mm bore, well within the 1000 mm maximum, making it a ready-to-ship actuator for light automation tasks.
This variant is fitted with NBR (nitrile) seals, offering reliable performance in standard industrial environments. The 12 mm diameter piston rod and PT1/8 ports keep the unit lightweight, while the 21 mm adjustable air cushion at each end protects the end caps during high-cycle operation.
Airtac SC32 Standard Cylinder SC32X80N Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X80N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X80N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X80N Is Used
Small Part Ejection
Pushes lightweight components off a conveyor line. The 80 mm stroke provides enough travel for clean separation in compact packaging machines.
Clamping & Fixturing
Applies consistent 402 N holding force for gluing or assembly jigs. The NBR seals are compatible with many standard cutting fluids and light oils.
Test Rig Actuation
Ideal for life-cycle test fixtures requiring thousands of cycles. The adjustable cushion reduces end-of-stroke impact, preserving the unit's service life.
Is the Airtac SC32 Standard Cylinder SC32X80N the Right Cylinder?
Choose the SC32 when your application needs up to 402 N of force at standard plant pressure. If you require more power, stepping up to the SC40 provides 628 N at the same 0.5 MPa. For strokes significantly longer than this 80 mm unit, ensure the 12 mm rod is not subjected to side loads, which can cause bending.
To replace an existing cylinder, match five key points: 32 mm bore, 80 mm stroke, PT1/8 port thread, NBR seal material, and the basic (no bracket) mounting configuration. This model does not include a magnet, so if you need position sensing, select the -S variant and add compatible CMSG/DMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X80N FAQ
At 0.7 MPa operating pressure, this 32 mm bore cylinder generates 563 N of push force. The pull force at the same pressure is lower due to the rod area; refer to the datasheet for full retraction force values.
No, the SC32X80N model does not have a built-in magnet. To mount CMSG or DMSG sensors directly on the barrel, you need the SC32X80S variant, which includes the magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X80N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.