The AirTAC Airtac SC32 Standard Cylinder SC32X80S is a genuine double-acting standard air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X80S is a double-acting pneumatic cylinder with a 32 mm bore and 80 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its compact tie-rod body (A=140 mm) and 12 mm diameter piston rod suit light automation tasks where space is limited.
This model includes the factory-installed -S magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The adjustable air cushion (21 mm) decelerates the piston smoothly at stroke end, and the standard PT1/8 port thread connects to common pneumatic fittings.
| Model | Airtac SC32 Standard Cylinder SC32X80S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 80 mm stroke and magnetic piston sensing provide reliable gate actuation on compact conveyors, with sensor confirmation of open/closed state.
Lightweight 32 mm bore cylinder with 402 N push force operates gripper jaws or vacuum cup extend/retract on small assembly robots.
Smooth cushioned motion and sensor feedback make this cylinder suitable for clamping test tubes or microplates in diagnostic instruments.
For slightly higher force, the SC40 series provides 628 N push at 0.5 MPa. When replacing an existing cylinder, match five points: 32 mm bore, 80 mm stroke, PT1/8 port thread, the built-in magnet (-S suffix), and the basic (no bracket) mounting style. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes. The -S suffix denotes a built-in magnet, so AirTAC CMSG, DMSG, or EMSG sensors can be clamped onto the barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.