The AirTAC Airtac SC32 Standard Cylinder SC32X80SLB is a genuine double-acting standard air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X80SLB is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). With an 80 mm stroke and a 12 mm diameter piston rod, it is well-suited for short linear movements in confined machine spaces.
This model is factory-configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and includes LB axial foot mounts (F-SC32LB) for secure surface installation. The total extended body length is approximately 220 mm, and the adjustable pneumatic cushion helps decelerate the piston smoothly at each end of the 21 mm cushion zone.
| Model | Airtac SC32 Standard Cylinder SC32X80SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 80 mm stroke and 402 N force efficiently actuate diverter gates on compact conveyor systems, directing lightweight packages with reliable sensor confirmation via the built-in magnet.
Delivers controlled clamping force for small components in jigs. The LB foot mount provides a stable base, and the adjustable cushion prevents vibration during high-speed cycling.
Ideal for precise linear sampling mechanisms. The double-acting control allows repeatable extension and retraction, while the magnetic piston enables end-of-stroke detection for automated sequences.
Choose the SC32 bore for light pneumatic tasks where its 402 N push force at 0.5 MPa is sufficient. If your application requires more force, stepping up to the SC40 bore provides 628 N at the same pressure. For strokes longer than 300 mm, consider external guides to protect the 12 mm rod from bending under side loads.
To ensure a direct replacement, match five key points: 32 mm bore, 80 mm stroke, PT1/8 port thread, the LB foot mounting accessory, and the built-in magnet for sensor compatibility. This is a genuine AirTAC tie-rod cylinder, not an ISO 15552 profile unit.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
No. The AirTAC SC series is a tie-rod cylinder that is shorter than an ISO 15552 cylinder, so ISO 15552 mounts are not interchangeable. You must use the dedicated SC series mounting accessories, such as the F-SC32LB foot mount included with this model.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.