The AirTAC Airtac SC32 Standard Cylinder SC32X835S is a genuine double-acting standard air cylinder with a Ø32mm bore and 835mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X835S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa from its 32 mm bore. The extended 835 mm stroke makes it a made-to-order configuration for applications needing a long reach in a compact tie-rod body, with a 12 mm diameter piston rod.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for reliable end-of-stroke detection. The adjustable air cushion (21 mm length) decelerates the piston smoothly, and the PT1/8 port thread ensures straightforward pneumatic connections.
| Model | Airtac SC32 Standard Cylinder SC32X835S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 835 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×835 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 835 mm stroke pushes components across wide conveyor gaps or between distant workstations, with sensor feedback confirming full extension and retraction.
Uses the 724 N max force to divert lightweight packages on high-speed lines, where the magnet enables precise position monitoring for sequencing.
Extends a probe or sampling tool deep into a test chamber, with the non-standard stroke tailored to the equipment depth and sensor confirmation of home position.
Select the SC32 bore when your application requires up to 724 N of thrust at 0.9 MPa. If you need more force, stepping up to the SC40 bore provides 628 N at 0.5 MPa. For this 835 mm stroke, the rod is extended significantly; ensure the load is guided externally to prevent bending or uneven seal wear on the 12 mm rod.
For a direct replacement, match these five points: 32 mm bore, 835 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting style. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 804 N (82 kgf).
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length (A=140 mm) than an equivalent ISO 15552 cylinder. It is not dimensionally interchangeable. Only replace another AirTAC SC32 cylinder with the same bore, stroke, port, magnet, and mounting configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.