Airtac SC32 Standard Cylinder SC32X95
The AirTAC Airtac SC32 Standard Cylinder SC32X95 is a genuine double-acting standard air cylinder with a Ø32mm bore and 95mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke95 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X95
The SC32X95 is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm piston rod and 21 mm adjustable air cushion make it well-suited for light automation tasks where space is limited but reliable actuation is essential.
With a body length A of 140 mm and a 95 mm stroke, the total extended length reaches 235 mm. This model comes with the default TPU seals for a standard operating temperature range of -20 to +70 °C and PT1/8 threaded ports, ready for direct integration into pneumatic circuits.
Airtac SC32 Standard Cylinder SC32X95 Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X95 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X95
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X95 Is Used
Small Part Ejection
The 402 N push force at 0.5 MPa is ideal for ejecting lightweight plastic or metal parts from injection molds or stamping dies, where the 21 mm cushion softens the end-of-stroke impact.
Diverter Gates
Use the 95 mm stroke to actuate small diverter gates on conveyor lines, sorting packages or components with a reliable double-acting cycle.
Lab Automation
The compact 140 mm body length and clean operation make the SC32X95 a good fit for test tube handling or sample preparation in benchtop lab automation setups.
Is the Airtac SC32 Standard Cylinder SC32X95 the Right Cylinder?
Choose the SC32X95 when your application requires a force around 402 N at standard plant pressure. If you need a bit more power, stepping up to the SC40 bore provides 628 N at the same 0.5 MPa. For strokes of 95 mm, the 32 mm bore is well within its standard stroke limit of 1000 mm, so no special side-load concerns apply for purely axial loads.
For replacement, ensure a perfect match on five points: 32 mm bore, 95 mm stroke, PT1/8 port thread, basic (no mounting accessory), and no magnet. This guarantees a drop-in fit for an existing AirTAC SC tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X95 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
No. The AirTAC SC series is a tie-rod cylinder that is shorter than an ISO 15552 profile cylinder. It is not dimensionally interchangeable with ISO 15552 types. It will only directly replace another AirTAC SC32 tie-rod cylinder with the same stroke and port configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.