The AirTAC Airtac SC32 Standard Cylinder SC32X950 is a genuine double-acting standard air cylinder with a Ø32mm bore and 950mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X950 is a double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa and up to 724 N at the 0.9 MPa maximum operating pressure. Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for the 950 mm stroke, making it a capable mid-range actuator for light industrial tasks.
With a body length A of 140 mm, the total extended length reaches 1090 mm. This model features PT1/8 ports and an M10x1.25 rod thread. As a standard-stroke model within the 1000 mm maximum for 32 mm bore SC cylinders, it suits applications needing extended linear reach without stepping up to a larger frame size.
| Model | Airtac SC32 Standard Cylinder SC32X950 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushing lightweight totes or cartons off a conveyor line where the 950 mm reach eliminates the need for a complex linkage.
Actuating a sliding door or guard panel on a machine enclosure, using the full 950 mm stroke for wide access openings.
Operating a simple lift-and-lower mechanism for small bins in a pick-to-light system, leveraging the 402 N push force.
Select the SC32X950 when your application requires a 950 mm stroke with a push force around 402 N at standard plant air. If you need more force, consider stepping up to the SC40 series which provides 628 N at 0.5 MPa. For strokes of this length, ensure the load is guided externally to prevent bending stress on the 12 mm rod. For a direct replacement, match the 32 mm bore, 950 mm stroke, PT1/8 port thread, and basic mounting configuration.
Quick checklist
At 0.5 MPa, the SC32X950 provides 402 N extending and 345 N retracting. At the maximum operating pressure of 0.9 MPa, the extending force increases to 724 N.
This is a tie-rod cylinder, not an ISO 15552 profile cylinder. For a functional replacement, match the 32 mm bore, 950 mm stroke, PT1/8 ports, and basic mounting. For strokes over 300 mm, use an external guide to protect the 12 mm rod from side loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.