The AirTAC AirTAC SDA80X60B Compact Cylinder | 80mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA80X60B is a double-acting single-rod compact cylinder engineered for heavy-duty automation within a minimal axial footprint. Its riveted body assembly significantly reduces overall mounting depth compared to round-body alternatives, delivering a substantial 2513.3 N push force at 0.5 MPa alongside a 25 mm piston rod. This specific SKU features a male M22x1.5 threaded rod end for robust mechanical coupling to your load.
Deceleration at stroke extremes relies on a fixed NBR bumper rather than an adjustable air cushion, meaning external shock absorbers are advisable for high-energy cycles. Operating pressure spans 0.15-1.0 MPa, and because this configuration lacks the -S magnet option, it cannot directly host AirTAC reed or electronic switches.
| Model | AirTAC SDA80X60B Compact Cylinder | 80mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M14×1.5 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Drives heavy mold ejector pins in plastic injection machinery where the short riveted body minimizes rearward protrusion into the press frame.
Applies 2513.3 N of clamping force to hold sheet metal panels during robotic welding and forming operations.
Actuates heavy tier-lift platforms in packaging lines, utilizing the male M22x1.5 rod end for secure load coupling.
When sizing this 80 mm bore actuator, consider stepping down to the SDA63 which provides 1558.6 N push at 0.5 MPa, or moving up to the SDA100 which yields 3927 N at the same pressure. A practical safe working load is approximately 1508 N (about 60% of the 0.5 MPa output), translating to a vertical lift capacity near 128.1 kg with a 2:1 safety margin. To finalize your order, confirm the 80 mm bore, 60 mm stroke, PT3/8 port, and the male M22x1.5 rod thread.
Remember that a standard compact cylinder drifts when air pressure is lost or the directional valve is centered. The end bumpers only slow the piston near the stroke limits and do not function as a locking brake. If your application demands strict position holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This double-acting cylinder generates 2513.3 N push and 2267.8 N pull at 0.5 MPa, increasing to 3518.6 N push at 0.7 MPa. The theoretical maximum push force is 513 kgf at the 1.0 MPa operating pressure limit.
No. It uses fixed NBR bumpers to decelerate the stroke ends rather than field-adjustable cushions, so high-speed cycles may require external shock absorption. Additionally, this specific SKU lacks the -S magnet, meaning it cannot support reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.