Airtac SE100 Standard Air Cylinder SE100BX1000S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX1000S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke1000 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX1000S
The AirTAC SE100BX1000S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It generates a substantial 3927 N push force at 0.5 MPa (5497 N at 0.7 MPa), utilizing a 100mm bore and a 1000mm stroke. Equipped with a SUS304 stainless steel rod, this unit is specifically configured for corrosive environments and washdown duty where standard carbon steel rods would fail.
The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mount profile that resists corrosion and simplifies sensor placement across its three integrated grooves. Because this model includes the -S magnet, it supports direct mounting of AirTAC CMSE reed and DMSE electronic solid-state switches for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to tune the deceleration of this large mass via a set screw, softening hard end stops without relying on fixed rubber bumpers.
Airtac SE100 Standard Air Cylinder SE100BX1000S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX1000S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX1000S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX1000S Is Used
Palletizer Pusher
Drives a 1000mm stroke push arm to transfer heavy pallets, using its 5497 N push force at 0.7 MPa to overcome friction while the SUS304 rod withstands dusty industrial environments.
Washdown Diverter
Actuates a heavy flow-diversion gate in a food-grade washdown line, relying on the SUS304 stainless rod to resist moisture while the -S magnet triggers DMSE electronic sensors.
Press Ejection
Ejects formed metal parts from a hydraulic press, utilizing the 3927 N extend force at 0.5 MPa and the field-adjustable cushion to soften the 1000mm stroke impact at high speeds.
Is the Airtac SE100 Standard Air Cylinder SE100BX1000S the Right Cylinder?
Selecting this 100mm bore provides a maximum thrust of 801 kgf at 1.0 MPa. If your application requires less force, stepping down to the 80mm bore drops the 0.5 MPa push to 2513 N, whereas moving up to the 125mm bore increases it to 6136 N. As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a drop-in replacement for other ISO 15552 cylinders, matching the 100mm bore, 1000mm stroke, PT1/2 port, and standard mounting accessories. The SUS304 rod and -S magnet are essential upgrades for harsh environments requiring position feedback.
Because this cylinder features a 1000mm stroke, the extended rod is highly susceptible to side-load bending and rod-bearing wear. An external guide mechanism must be used to support the load and prevent premature seal failure. Furthermore, the adjustable air cushion only decelerates the piston near the stroke end; it does not function as a brake. If the machine loses air pressure, the piston will drift, requiring a BSE rod lock or external pilot-operated check valve to hold the load safely in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX1000S FAQ
This 100mm bore cylinder delivers a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and features a PT1/2 port.
No, the field-adjustable air cushion at both ends only decelerates the piston near the stroke end and is not a locking mechanism. If air pressure is lost or the valve is centered, the cylinder will drift. To hold a load securely without live pressure, you must use an AirTAC BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.