Airtac SE100 Standard Air Cylinder SE100BX100S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke100 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX100S
The AirTAC SE100BX100S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a substantial 3927 N push force at 0.5 MPa, scaling up to 5497 N at 0.7 MPa. Equipped with a SUS304 stainless steel rod, this unit is specifically built to withstand corrosive environments and rigorous washdown procedures without compromising structural integrity.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting contamination buildup. Field-adjustable air cushioning at both end caps allows technicians to tune deceleration precisely, softening hard end stops during high-speed operations. Furthermore, the integrated magnet enables seamless position detection using AirTAC CMSE reed or DMSE electronic sensors.
Airtac SE100 Standard Air Cylinder SE100BX100S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX100S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX100S Is Used
Palletizer Push-off
Drives the heavy 100 mm stroke push-off arm in end-of-line palletizing cells, utilizing the 5497 N extend force at 0.7 MPa to strip stacked cartons securely onto outbound conveyors.
Hydraulic Press Blank Holder
Actuates the blank holder ring on a deep-draw hydraulic press, where the SUS304 stainless rod survives coolant splash and the 3927 N pull force at 0.5 MPa clamps sheet metal firmly.
Beverage CIP Deflector
Indexes the flow diverter valve inside a beverage clean-in-place skid, relying on the corrosion-resistant rod and DMSE electronic sensors to confirm stroke endpoints amid washdown cycles.
Is the Airtac SE100 Standard Air Cylinder SE100BX100S the Right Cylinder?
Selecting this 100 mm bore cylinder makes sense when your application requires robust thrust, generating 3927 N of push at 0.5 MPa. If your load demands less force, stepping down to the 80 mm bore yields 2513 N of push, conserving space and air consumption. Conversely, scaling up to the 125 mm bore provides 6136 N of push for heavier payloads. Keep in mind that a standard SE cylinder relies on continuous air pressure to maintain its position; if pneumatic supply is lost, the piston will drift. For critical load-holding safety, consider the BSE rod lock variant.
This model features a PT1/2 port, a Ø25 mm rod with an M20x1.5 thread, and a built-in magnet for CMSE or DMSE switches. Because it adheres strictly to the ISO 15552 mounting interface, it serves as a drop-in replacement for other ISO 15552 profile cylinders, allowing you to reuse existing FA front flanges or LB foot mounts without redesigning the machine plate.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX100S FAQ
This 100 mm bore cylinder generates 3927 N of push and 3681 N of pull at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes. The SE100BX100S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, reusing your existing mounting hardware and PT1/2 pneumatic connections without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.