Airtac SE100 Standard Air Cylinder SE100BX110S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX110S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 110mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke110 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX110S
The AirTAC SE100BX110S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 3927 N push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a smooth, flush exterior that resists corrosion and simplifies flush mounting against machine frames. The SUS304 stainless steel piston rod is specifically selected for washdown and corrosive environments, ensuring reliable operation where standard carbon steel rods would fail prematurely.
This 100 mm bore unit features a 110 mm stroke and includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. Field-adjustable air cushions at both stroke ends allow technicians to fine-tune end-of-stroke deceleration, minimizing impact shock when moving substantial loads at speeds up to 800 mm/s.
Airtac SE100 Standard Air Cylinder SE100BX110S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX110S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX110S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX110S Is Used
Palletizer Flap Control
Actuates heavy diverter flaps on high-speed palletizing lines, using its 3927 N push force to reliably shift fully loaded cardboard cartons without deflection.
Washdown Press Platen
Drives the lower platen of a food-grade pneumatic press, where the SUS304 stainless steel rod provides critical resistance against daily high-pressure caustic washdowns.
Injection Mold Ejector
Ejects dense plastic automotive interior panels from injection molds, utilizing the adjustable air cushion to soften the 110 mm stroke end and protect precision tooling.
Is the Airtac SE100 Standard Air Cylinder SE100BX110S the Right Cylinder?
Selecting this 100 mm bore cylinder makes sense when your application requires substantial thrust, specifically 3927 N of push at 0.5 MPa. If your load requirements are lighter, stepping down to an 80 mm bore reduces the footprint while still providing 2513 N of push force. Conversely, if you need maximum power, stepping up to a 125 mm bore yields 6136 N of push at 0.5 MPa. Because this is a double-acting cylinder, it will drift if air pressure is lost or a valve centers; for position holding, integrate an external BSE rod lock or pilot-operated check valve.
As a true ISO 15552 profile cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to use existing standardized mounting hardware like FA front flanges or TC trunnions. It uses a PT1/2 port and a 25 mm diameter rod with an M20x1.5 thread. At a 110 mm stroke, side-load stress on the rod bearing is minimal, but for any future strokes exceeding 300 mm, adding an external guide is recommended to prevent bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX110S FAQ
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force reaches 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE100BX110S is built to the ISO 15552 / VDMA 24562 dimensional standard, meaning it serves as a drop-in replacement for any standard ISO 15552 profile cylinder. You can reuse your existing mounting brackets and hardware, and the built-in magnet (-S) works directly with AirTAC CMSE reed or DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.