Airtac SE100 Standard Air Cylinder SE100BX150H
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX150H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke150 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX150H
The AirTAC SE100BX150H is a double-acting single-rod ISO 15552 profile cylinder engineered for severe environments. It generates 3927 N of push force at 0.5 MPa and features a SUS304 stainless steel rod alongside a Viton FKM seal, extending the operating temperature range up to 150 degrees Celsius for high-heat or washdown duties.
Built with a square extruded aluminum barrel free of external tie rods, this unit mounts flush against machine frames while resisting corrosion. The field-adjustable air cushion at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling. This specific SKU omits the position-sensing magnet, so it operates without CMSE or DMSE switches.
Airtac SE100 Standard Air Cylinder SE100BX150H Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX150H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX150H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX150H Is Used
Hot Melt Pressing
Drives a heated platen in a rubber gasket molding press, utilizing the Viton FKM seal to withstand 150 C ambient heat while delivering 3927 N of clamping force.
Bottle Rinser Diverter
Actuates a routing gate on a beverage washdown line, where the SUS304 stainless rod resists moisture and the PT1/2 port handles rapid air exchange.
Metal Stamping Ejector
Pushes formed aluminum blanks out of a progressive die, relying on the adjustable air cushions to decelerate the 25 mm rod smoothly at 800 mm/s.
Is the Airtac SE100 Standard Air Cylinder SE100BX150H the Right Cylinder?
Select this 100 mm bore when a task requires substantial thrust, specifically 3927 N push at 0.5 MPa or 801 kgf at 1.0 MPa. If your application needs less force, stepping down to the 80 mm bore yields 2513 N at 0.5 MPa. Conversely, scaling up to the 125 mm bore provides 6136 N. Because this is a double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered; a BSE rod lock variant is required for failsafe holding. At a 150 mm stroke, the 25 mm rod and M20x1.5 thread handle moderate side loads, but long unsupported strokes still demand an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX150H FAQ
This 100 mm bore cylinder provides 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. Thanks to the Viton FKM seal, it operates from -20 to 150 C, and it runs at speeds of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, serving as a drop-in replacement for other profile cylinders with matching 100 mm bores. It uses a PT1/2 port and shares standard mounting interface dimensions, though this specific SKU lacks a sensor magnet for CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX150H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.