Airtac SE100 Standard Air Cylinder SE100BX150SH
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX150SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke150 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX150SH
The AirTAC SE100BX150SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding washdown and high-temperature environments. It delivers a robust 3927 N push force at 0.5 MPa and features a 150 mm stroke. Equipped with a SUS304 stainless steel rod and Viton (FKM) seals, this unit reliably operates in ambient temperatures up to 150 C where standard rubber seals would quickly degrade.
Built to the ISO 15552 / VDMA 24562 dimensional standard, its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames. The integrated -S magnet enables seamless position feedback with AirTAC CMSE reed or DMSE electronic sensors, while the field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration for heavy 100 mm bore loads moving at speed.
Airtac SE100 Standard Air Cylinder SE100BX150SH Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX150SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX150SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX150SH Is Used
Food Grade Conveyor Diverting
The SUS304 rod and Viton FKM seals withstand harsh chemical washdowns up to 150 C, making it ideal for diverting heavy product flow on stainless steel food processing lines.
Hot Stamp Press Ejection
Providing 3927 N of push force at 0.5 MPa, this cylinder reliably ejects formed metal parts from hot stamping presses where ambient heat would destroy standard TPU seals.
Palletizer End-of-Arm Tooling
The 150 mm stroke and ISO 15552 mounting interface allow seamless integration into heavy-duty palletizer tooling, using the built-in magnet to confirm grip and release positions.
Is the Airtac SE100 Standard Air Cylinder SE100BX150SH the Right Cylinder?
When sizing this 100 mm bore actuator, evaluate your force margins carefully: the SE80X150 provides 2513 N push at 0.5 MPa if your load is lighter, while stepping up to the SE125X150 yields 6136 N for heavier demands. Remember that a standard SE cylinder does not hold its load if air pressure drops or the valve centers—the piston will drift. For fail-safe position holding, consider the BSE rod-lock variant. To retrofit this model globally, match the 100 mm bore, 150 mm stroke, PT1/2 port, and your specific mounting accessory. Because this configuration includes the -S magnet, you are fully equipped for CMSE or DMSE sensor integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX150SH FAQ
This 100 mm bore cylinder provides 3927 N push and 3681 N pull at 0.5 MPa, and 5497 N push at 0.7 MPa, with a maximum push force of 801 kgf at 1.0 MPa. It operates at 30-800 mm/s, uses a PT1/2 port, and features a 25 mm SUS304 rod with an M20x1.5 thread.
Yes. The SE100BX150SH includes a Viton (FKM) seal rated for continuous operation up to 150 C, and a SUS304 stainless steel rod for superior corrosion resistance. Combined with the tie-rod-free extruded aluminum barrel, it is highly suited for aggressive washdown and high-heat industrial applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX150SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.