Airtac SE100 Standard Air Cylinder SE100BX180S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 180mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke180 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX180S
The AirTAC SE100BX180S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a substantial 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and 180 mm stroke to power demanding equipment.
This unit features a SUS304 stainless steel rod (code B) for superior corrosion resistance in washdown environments, and includes a built-in magnet for CMSE and DMSE position sensing. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting footprint that simplifies sensor placement along three integrated grooves.
Airtac SE100 Standard Air Cylinder SE100BX180S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX180S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX180S Is Used
Palletizer Case Pusher
Uses the 3927 N push force to square and align heavy corrugated cardboard cases on a palletizer infeed before stretch wrapping, ensuring stable unit loads.
Metal Stamping Ejector
Leverages the 3681 N retract force and SUS304 rod to extract formed steel brackets from a stamping die, enduring occasional coolant spray without rod degradation.
Beverage Line Diverter
Employs the DMSE electronic sensor signal and 180 mm stroke to actuate a high-speed flow diverter gate on a bottling line, routing containers to packaging lanes.
Is the Airtac SE100 Standard Air Cylinder SE100BX180S the Right Cylinder?
If your application requires slightly less force, the 80 mm bore provides 2513 N of push at 0.5 MPa; conversely, stepping up to the 125 mm bore yields 6136 N. This SE100BX180S uses a PT1/2 port and an M20x1.5 rod thread. Remember that a standard SE cylinder relies on live air pressure to hold its load—if air is lost, the piston drifts, so a BSE rod lock is required for fail-safe holding. At 180 mm stroke, side load is minimal, but for any stroke over 300 mm you must use an external guide to prevent rod-bearing bending. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders without needing custom mounting plates.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX180S FAQ
This 100 mm bore cylinder generates 3927 N of push force and 3681 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 5497 N. The maximum allowable push force is 801 kgf when operating at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it drops right into existing mounting footprints. It features field-adjustable air cushioning at both ends, allowing you to turn a screw to soften end-of-stroke impacts at high speeds, though this deceleration mechanism is not a locking brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX180S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.