Airtac SE100 Standard Air Cylinder SE100BX200H
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX200H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX200H
The AirTAC SE100BX200H is a double-acting, single-rod ISO 15552 profile cylinder engineered for severe environments. It generates 3927 N of push force at 0.5 MPa and features a SUS304 stainless steel rod alongside a Viton FKM seal, extending the operating temperature range up to 150 C for washdown or high-heat processing lines.
Built on an extruded aluminum barrel without external tie rods, this body style maintains a flush, corrosion-resistant exterior that mounts cleanly against machine frames. The unit relies on a field-adjustable air cushion at both ends to decelerate the piston near the stroke limits, and because this specific SKU lacks the -S magnet code, it is not equipped for CMSE or DMSE position sensing.
Airtac SE100 Standard Air Cylinder SE100BX200H Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX200H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX200H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX200H Is Used
Palletizer Case Erector
Provides the 5497 N push force at 0.7 MPa required to fold and seal heavy corrugated cardboard blanks in automated packaging lines, withstanding the heat generated by glue applicators.
Bottle Divertor Gate
Actuates heavy stainless steel flow-diverter gates in bottling washdown zones, utilizing the SUS304 rod and Viton seal to resist harsh chemical cleaning agents and 150 C temperatures.
Injection Mold Ejector
Drives heavy mold ejection plates in plastic injection machinery where the 801 kgf maximum thrust clears stuck parts, benefiting from the adjustable cushion to soften hard end-stops.
Is the Airtac SE100 Standard Air Cylinder SE100BX200H the Right Cylinder?
Choosing this 100 mm bore depends on needing heavy thrust within the 30-800 mm/s speed range. If 3927 N of push at 0.5 MPa is excessive, stepping down to an 80 mm bore yields 2513 N. Conversely, scaling up to a 125 mm bore provides 6136 N. Keep in mind that a plain double-acting cylinder drifts when air is removed or a valve centers; this model cannot hold a load mid-stroke without live pressure, so a BSE rod lock is required for fail-safe holding.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders using the same 200 mm stroke, PT1/2 port, and standard mounting hardware. Although the 25 mm rod and M20x1.5 thread carry substantial side load, a 200 mm stroke is short enough that severe rod-bearing bending is minimal, though external guides are always recommended for offset loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX200H FAQ
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, push increases to 5497 N. The maximum push force is 801 kgf at 1.0 MPa operating pressure.
No, a standard double-acting SE cylinder will drift and cannot hold a load if air is exhausted or the valve is centered. The adjustable air cushion only decelerates the piston near the end of stroke; it does not act as a brake. For fail-safe position holding, consider the BSE series rod lock cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX200H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.