Airtac SE100 Standard Air Cylinder SE100BX200S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX200S
The AirTAC SE100BX200S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa and features a 100 mm bore paired with a 200 mm stroke.
This unit integrates a SUS304 stainless steel rod for superior corrosion resistance in washdown environments, alongside a built-in magnet for CMSE and DMSE position sensing. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machinery.
Airtac SE100 Standard Air Cylinder SE100BX200S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX200S Is Used
Palletizer Strapping
Drives the strapping head on an automated palletizer, utilizing the 3927 N push force to tension and seal steel bands around heavy loads.
CNC Fixture Clamping
Secures large cast iron automotive housings inside a CNC machining center, relying on the SUS304 rod to resist coolant corrosion.
Beverage Filler Gate
Actuates the divert valve on a beverage filling line, where the stainless rod endures frequent high-pressure washdown cycles.
Is the Airtac SE100 Standard Air Cylinder SE100BX200S the Right Cylinder?
If your application requires less force, the 80 mm bore provides 2513 N of push at 0.5 MPa, whereas stepping up to the 125 mm bore yields 6136 N. Because the 200 mm stroke falls below the 300 mm threshold, severe rod-bearing bending is mitigated, though external guides remain advisable for offset loads. Remember that the field-adjustable air cushion at both ends only decelerates the piston near the stroke limit; it cannot hold a load. For position holding without air pressure, specify a BSE rod lock variant. As a true ISO 15552 cylinder, it serves as a drop-in replacement sharing standard mounting dimensions and a PT1/2 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX200S FAQ
The SE100BX200S generates 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum of 801 kgf at 1.0 MPa. It uses a PT1/2 port and operates at 30-800 mm/s.
Yes, the SE100BX200S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware and pair it with AirTAC CMSE reed or DMSE electronic sensors using the built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.