Airtac SE100 Standard Air Cylinder SE100BX300H
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX300H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 300mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke300 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX300H
The AirTAC SE100BX300H is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding washdown and high-temperature environments. It delivers a robust 3927 N push force at 0.5 MPa and features a 100 mm bore paired with a 300 mm stroke. Built with a SUS304 stainless steel rod and FKM Viton seals, the operating temperature range extends to 150 C, resisting degradation where standard elastomers fail.
The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts at high cycling speeds. This SKU does not include a position magnet, so it lacks integrated CMSE or DMSE sensing out of the box.
Airtac SE100 Standard Air Cylinder SE100BX300H Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX300H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX300H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX300H Is Used
Beverage Bottling Line Diverter
With its SUS304 rod and 150 C FKM seals, this cylinder withstands daily caustic washdowns while providing 3927 N push to actuate high-speed flow diverter gates on a rotary bottling line.
Hot Stamping Press Ejector
The 300 mm stroke and Viton seals survive ambient oven heat, ejecting 100 mm wide stamped aluminum parts weighing up to 80 kg from a heated die without seal degradation.
Palletizer End-Effector Actuator
Generating 5497 N of thrust at 0.7 MPa, it drives a mechanical gripper carriage 300 mm forward to engage heavy pallet loads in a high-cycle packaging cell.
Is the Airtac SE100 Standard Air Cylinder SE100BX300H the Right Cylinder?
This 100 mm bore provides 3927 N push at 0.5 MPa. If your load requires less force, the 80 mm bore offers 2513 N push; if you need substantially more thrust, the 125 mm bore provides 6136 N push. Because this is a 300 mm stroke, the unsupported rod length increases bending moments on the rod bearing under lateral loads—an external guide rail is recommended to prevent premature wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders, matching the PT1/2 port and M20x1.5 rod thread. Remember that the air cushion only decelerates the piston near the stroke end; it cannot hold a load if air pressure is lost. For position holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX300H FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa.
Yes. The SE100BX300H features a SUS304 stainless steel rod and FKM (Viton) seals, expanding the operating temperature range up to 150 C. The extruded profile barrel lacks external tie rods, reducing crevices where moisture and contaminants accumulate, making it highly suitable for washdown duty.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX300H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.