Airtac SE100 Standard Air Cylinder SE100BX50S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX50S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 50mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke50 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX50S
The AirTAC SE100BX50S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 3927 N push force at 0.5 MPa and utilizes a SUS304 stainless steel rod (code B) for superior corrosion resistance in washdown or chemically aggressive environments. The integrated magnet (code S) enables precise position detection using AirTAC CMSE reed or DMSE electronic sensors.
Unlike traditional tie-rod designs, this unit features a square extruded aluminum barrel that mounts flush while resisting corrosion. The field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, softening hard mechanical stops to extend equipment lifespan.
Airtac SE100 Standard Air Cylinder SE100BX50S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX50S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX50S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX50S Is Used
Corrosive Fluid Filling
Drives stainless steel diverter valves and filling nozzles in beverage lines, using the 3927 N push force to handle viscous fluids while the SUS304 rod withstands daily chemical washdowns.
Pallet Clamp Mechanisms
Locks heavy wooden pallets in place on rotary indexing tables, where the 50 mm stroke delivers rapid clamping and the S magnet triggers DMSE sensors to confirm grip before rotation.
Lab Waste Compaction
Compresses biological waste containers, leveraging the 801 kgf maximum thrust to reduce volume safely, with the adjustable cushion absorbing the shock of sudden compaction stops.
Is the Airtac SE100 Standard Air Cylinder SE100BX50S the Right Cylinder?
Stepping down to an 80 mm bore drops the 0.5 MPa push force to 2513 N, whereas moving up to a 125 mm bore increases it to 6136 N. This 100 mm model hits a sweet spot at 3927 N push (3681 N pull) and 801 kgf max at 1.0 MPa. Because the 50 mm stroke is short, side-load stress on the M20x1.5 rod thread and bearing remains minimal, though external guides are always recommended for rigid lateral loads. Remember that this standard SE cylinder relies on live air pressure to move; it will drift if air is lost, so specify a BSE rod lock for fail-safe holding. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders and shares standard mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX50S FAQ
At 0.5 MPa, the SE100BX50S provides 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE100BX50S is dimensionally interchangeable per ISO 15552 standards, meaning it serves as a drop-in replacement for other ISO 15552 cylinders. It uses a PT1/2 port and a standard M20x1.5 rod thread, sharing standard mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.