Airtac SE100 Standard Air Cylinder SE100BX600S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX600S
The AirTAC SE100BX600S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It delivers a robust 3927 N push force at 0.5 MPa (5497 N at 0.7 MPa), making it well-suited for heavy-duty industrial positioning. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 100 mm bore, 600 mm stroke unit features a SUS304 stainless steel piston rod (code B) for superior resistance in washdown or corrosive settings. A built-in magnet (code S) enables seamless integration with AirTAC CMSE reed and DMSE electronic sensors for end-of-stroke verification.
Airtac SE100 Standard Air Cylinder SE100BX600S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX600S Is Used
CNC Lathe Bar Feeder
Pushes heavy raw bar stock through a spindle with 3927 N of thrust at 0.5 MPa, using the 600 mm stroke to accommodate long stock lengths.
Injection Mold Ejection
Drives large molded parts out of a heavy press, relying on the SUS304 rod to resist humid, high-temperature factory environments.
Pallet Diverting Arm
Actuates a heavy diverter mechanism on a packaging line, using the built-in magnet to trigger DMSE solid-state sensors for precise routing.
Is the Airtac SE100 Standard Air Cylinder SE100BX600S the Right Cylinder?
Selecting this 100 mm bore cylinder makes sense when substantial thrust is required but you are not yet reaching the maximum 125 mm bore class (which provides 6136 N push at 0.5 MPa). If you can step down to an 80 mm bore, expect 2513 N of push force at 0.5 MPa. For this 600 mm stroke, the Ø25 mm rod and M20x1.5 thread handle significant loads, but long unsupported strokes invite rod-bearing bending; always utilize an external guide to prevent side-load damage.
Because it is an ISO 15552 profile cylinder, it offers drop-in dimensional interchangeability with other ISO 15552 cylinders, simplifying retrofits. The port is PT1/2. Note that the field-adjustable air cushions at both ends only decelerate the piston near stroke end—they do not hold loads. If your process loses air pressure and must hold a load safely, specify a BSE rod lock variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX600S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force reaches 5497 N. The maximum push force is 801 kgf at 1.0 MPa operating pressure.
Yes, its dimensions are interchangeable per ISO 15552, allowing it to drop into existing mounting hardware. However, it does not hold position when air is lost; the adjustable cushions only decelerate the piston near stroke end. Use a BSE rod lock variant if load holding is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.