Airtac SE100 Standard Air Cylinder SE100BX700SH
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX700SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 700mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX700SH
The AirTAC SE100BX700SH is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty actuation. It delivers a robust 3927 N push at 0.5 MPa, utilizing a 100 mm bore and a 700 mm stroke. Equipped with a SUS304 stainless steel rod and FKM Viton seals, this variant is purpose-built to withstand corrosive washdown environments and elevated temperatures up to 150 C.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Integrated sensor grooves on three sides accept CMSE reed or DMSE electronic switches, enabled here by the built-in S magnet. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, smoothly absorbing kinetic energy from high-speed 30-800 mm/s cycles.
Airtac SE100 Standard Air Cylinder SE100BX700SH Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX700SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX700SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX700SH Is Used
Pallet Dispenser Ejection
Provides the 5497 N push at 0.7 MPa required to strip and eject empty pallets from a magazine stack over the 700 mm travel distance.
Food Washdown Gate
Lifts heavy stainless steel diversion gates in food processing lines, leveraging the SUS304 rod and 150 C FKM seals to survive high-temperature caustic washdowns.
Automated Press Transfer
Actuates a 700 mm transfer arm to move heavy steel stampings between press stations, using the adjustable cushions to soften hard end stops at high speeds.
Is the Airtac SE100 Standard Air Cylinder SE100BX700SH the Right Cylinder?
Selecting the SE100BX700SH is ideal when your application requires substantial thrust along a long 700 mm travel. If you need less force, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa, whereas stepping up to the 125 mm bore provides a 6136 N push at 0.5 MPa for heavier payloads. Because this cylinder features a 700 mm stroke, the extended rod is susceptible to bending under lateral loads; always incorporate an external guide rail to prevent rod-bearing wear and ensure smooth linear travel.
As a true ISO 15552 profile cylinder, this unit provides drop-in dimensional interchangeability with other standard ISO 15552 cylinders, simplifying retrofits. It utilizes a PT1/2 port and an M20x1.5 rod thread. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the machinery must hold a vertical load without live air pressure, integrate an external rod lock like the BSE series or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX700SH FAQ
The 100 mm bore generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, with a maximum push of 801 kgf at 1.0 MPa. It operates at 30-800 mm/s, uses a PT1/2 port, and features a 36 mm cushion length.
Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder for straightforward retrofits. However, while the field-adjustable air cushion decelerates the piston at stroke ends, it does not lock the rod; use an external rod lock or pilot check valve if you need to hold a load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX700SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.