Airtac SE100 Standard Air Cylinder SE100BX800S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX800S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 800mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke800 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX800S
The AirTAC SE100BX800S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a substantial 3927 N push force at 0.5 MPa, utilizing a 100 mm bore and an 800 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while simplifying external accessory attachment.
This specific configuration incorporates a SUS304 stainless steel rod (code B) for superior resistance in washdown or corrosive environments, paired with a built-in magnet (code S) for position detection. The integrated magnet interfaces seamlessly with AirTAC CMSE reed and DMSE electronic sensors along the three-sided sensor grooves. Furthermore, field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration, protecting long-travel payloads from harsh mechanical impacts.
Airtac SE100 Standard Air Cylinder SE100BX800S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX800S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX800S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX800S Is Used
Corrugated Box Palletizer
Drives the lifting head on end-of-line palletizing machines, utilizing its 3927 N push at 0.5 MPa to elevate heavy stacks of corrugated cardboard boxes over an 800 mm vertical travel distance.
Hydraulic Press Loader
Feeds heavy steel blanks into a forming press, where the SUS304 stainless rod withstands minor splashes of cutting fluid and the adjustable cushion softens the 800 mm stroke impact.
Chemical Dosing Header
Actuates large-bore diverter valves on chemical dosing skids, relying on the SUS304 rod material for corrosion resistance against aggressive ambient vapors.
Is the Airtac SE100 Standard Air Cylinder SE100BX800S the Right Cylinder?
When sizing this 100 mm bore model, stepping down to an 80 mm cylinder yields a 2513 N push at 0.5 MPa, while stepping up to a 125 mm bore provides a 6136 N push at 0.5 MPa, allowing you to scale power precisely to the load. Because this is a standard double-acting cylinder, it will not hold a load statically if air pressure is lost or the control valve is centered; the piston will drift. For critical load-holding safety, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.
At 800 mm of stroke, the unsupported mass and leverage on the Ø25 mm rod increase bending stress on the front bearing cap. For this extended travel, incorporating an external guide rail prevents side-load damage and premature seal wear. This unit is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 cylinders, utilizing standard mounting hardware and a PT1/2 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX800S FAQ
The SE100BX800S provides 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. Its operating speed ranges from 30 to 800 mm/s.
Yes, the SE100BX800S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. It shares the standardized mounting footprint and PT1/2 port locations, allowing it to serve as a direct drop-in replacement for other ISO 15552 profile cylinders using existing mounting brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX800S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.