Airtac SE100 Standard Air Cylinder SE100X240
The AirTAC Airtac SE100 Standard Air Cylinder SE100X240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 240mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke240 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X240
The AirTAC SE100X240 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 3927 N push force at 0.5 MPa. It features a 100 mm bore and a 240 mm stroke, making it well-suited for heavy-duty industrial positioning tasks.
This unit utilizes a square extruded aluminum barrel without external tie rods, which keeps the body compact and flush-mountable while resisting corrosion. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speed. Because this specific SKU lacks the S magnet code, it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE100 Standard Air Cylinder SE100X240 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X240
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X240 Is Used
Injection Mold Extraction
Provides the heavy 3927 N push force required to positively eject dense molded parts from stationary injection molding platens.
Press Ram Actuation
Drives a 240 mm stroke to lower a light assembly press ram, using its adjustable cushions to prevent shock at the bottom of the cycle.
Pallet Diverting Gate
Powers a heavy-duty lane diverter on a packaging conveyor, utilizing the no-tie-rod profile body for tight side-mounting clearance.
Is the Airtac SE100 Standard Air Cylinder SE100X240 the Right Cylinder?
When sizing this actuator, compare its 3927 N push at 0.5 MPa against your actual load requirements. If you need less force, stepping down to the 80 mm bore yields 2513 N of push; if your application demands more power, the 125 mm bore provides 6136 N. This model uses a PT1/2 port and a 25 mm rod, and serves as a direct drop-in replacement for any standard ISO 15552 cylinder with matching mounting accessories.
Note that a plain SE cylinder will drift if air pressure is lost or the valve is centered, as the adjustable air cushion only decelerates the piston near stroke end and does not function as a locking brake. If your setup must hold a vertical load safely without live pressure, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X240 FAQ
At 0.5 MPa, the SE100X240 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE100X240 is dimensionally interchangeable per ISO 15552, allowing it to serve as a drop-in replacement for other standard profile cylinders using existing mounting hardware and PT1/2 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X240
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.