Airtac SE100 Standard Air Cylinder SE100X275
The AirTAC Airtac SE100 Standard Air Cylinder SE100X275 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 275mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke275 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100X275
The AirTAC SE100X275 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic motion. It generates a substantial 3927 N of push force at 0.5 MPa, making it well-suited for high-inertia loads. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves.
This 100 mm bore unit features a Ø25 mm piston rod with an M20x1.5 thread, PT1/2 ports, and field-adjustable air cushioning at both ends. Because this SKU lacks the -S magnet, it does not support CMSE or DMSE position sensing out of the box. The cushioning is a true deceleration mechanism, not a fixed bumper, allowing technicians to tune end-of-stroke damping for fast 30-800 mm/s cycles.
Airtac SE100 Standard Air Cylinder SE100X275 Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100X275 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100X275
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100X275 Is Used
Metal Stamping Press
Provides the 3927 N push force at 0.5 MPa required to seat bearings or form light sheet metal blanks in automated press lines.
Pallet Diverting Gate
Uses the 275 mm stroke to push heavy pallets off a main roller conveyor onto a secondary packaging branch at high cycle rates.
Plastic Injection Mold Extraction
Drives the 25 mm rod with M20x1.5 thread to pull large molded plastic automotive interior panels from the tool cavity securely.
Is the Airtac SE100 Standard Air Cylinder SE100X275 the Right Cylinder?
Generating 3927 N of push at 0.5 MPa, this model sits in a heavy-duty class. If your application requires less force, stepping down to the 80 mm bore yields 2513 N of push, while moving up to the 125 mm bore provides 6136 N for highly demanding press operations. When retrofitting, ensure you match the 100 mm ISO 15552 mounting interface, the 275 mm stroke, and the PT1/2 port size.
Because this stroke is 275 mm, the extended piston rod is subject to bending moments under lateral loads; an external guide is recommended to prevent rod-bearing wear. Note that a standard SE cylinder will drift if air pressure is lost or the valve is centered—it cannot hold a load vertically without live pressure, so consider a BSE rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100X275 FAQ
At 0.5 MPa, the SE100X275 delivers 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force reaches 5497 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE100X275 is dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing mounting hardware using the standardized footprint, matching the 100 mm bore, 275 mm stroke, and PT1/2 port configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100X275
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.