
The AirTAC SE80 Standard Cylinder SE80AX155 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 155mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX155 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa. Because it uses an extruded aluminum barrel without external tie rods, the body is highly compact, corrosion-resistant, and mounts flush against machine frames without protruding hardware. This specific SKU features a SUS420J2 stainless steel rod (code A), making it highly suitable for corrosive environments or washdown duty cycles.
Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during high-speed actuation. Note that this specific unit lacks a built-in magnet, meaning it is not ready for CMSE or DMSE position sensing without modification. The robust Ø25 mm rod and M20x1.5 thread provide excellent rigidity for demanding industrial loads.
| Model | Airtac SE80 Standard Cylinder SE80AX155 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the heavy push-off arm on a palletizing cell, utilizing the 2513 N push force to shove completed pallet loads onto a wrapping conveyor.
Actuates a small stamping die in a food-grade line, where the SUS420J2 stainless rod withstands daily high-pressure caustic washdowns.
Provides the main ejection stroke for a mid-size plastic injection molding machine, using its 155 mm stroke to clear parts from the mold cavity.
Select this 80 mm bore when your application requires roughly 2513 N of push at 0.5 MPa, bridging the gap between the 63 mm bore (1559 N push) and the 100 mm bore (3927 N push). This sizing makes it ideal for moving substantial masses that would stall a smaller cylinder but where a 100 mm bore would be physically oversized. Remember that a plain SE cylinder does not hold its position or load when air is lost or a valve is centered; the piston will drift. If your process requires mid-stroke holding under zero pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
As a true ISO 15552 cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders, allowing a direct retrofit using existing mounting hardware. To match this exact configuration, specify the 80 mm bore, 155 mm stroke, PT3/8 port, basic mounting, and the SUS420J2 stainless steel rod. Since this unit lacks the -S magnet, you cannot mount reed or electronic sensors directly to the barrel grooves for end-position confirmation.
Quick checklist
At 0.5 MPa, the SE80AX155 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX155 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and can serve as a direct replacement for other ISO 15552 profile cylinders using existing mounting brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.