Airtac SE80 Standard Cylinder SE80AX65
The AirTAC Airtac SE80 Standard Cylinder SE80AX65 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 65mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke65 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX65
The AirTAC SE80AX65 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force at 0.5 MPa. Its 80 mm bore and 65 mm stroke operate at speeds of 30-800 mm/s via a PT3/8 port, while the M20x1.5 rod thread handles substantial side loads effectively.
This unit features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance in washdown or humid environments. The extruded aluminum barrel omits external tie rods, keeping the body compact and flush-mountable, while field-adjustable air cushions at both ends let you fine-tune end-of-stroke deceleration to prevent hard impacts. Note that this SKU lacks a built-in magnet, so it is not compatible with CMSE or DMSE position sensors without modification.
Airtac SE80 Standard Cylinder SE80AX65 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX65 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX65
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX65 Is Used
Palletizer Case Pusher
Uses the 2513 N push force at 0.5 MPa to positively index filled corrugated cases onto a palletizer conveyor, leveraging the SUS420J2 rod for occasional washdowns.
CNC Fixture Clamping
Secures heavy cast iron engine blocks during machining, utilizing the 36 mm adjustable air cushion to soften the 65 mm stroke end-stop and protect the fixture integrity.
Metal Stamping Ejector
Ejects formed sheet metal brackets from a die, where the robust 25 mm rod diameter withstands high off-center loads and the tie-rod-free profile resists debris buildup.
Is the Airtac SE80 Standard Cylinder SE80AX65 the Right Cylinder?
If your application requires less force, the 63 mm bore neighbor provides 1559 N of push at 0.5 MPa; stepping up to the 100 mm bore yields 3927 N at the same pressure. Remember that a standard SE cylinder relies on live air pressure to hold a load—if air is lost or the valve centers, the piston will drift, so consider a BSE rod lock for strict position holding. For ISO 15552 dimensional interchangeability, match the 80 mm bore, 65 mm stroke, PT3/8 port, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX65 FAQ
At 0.5 MPa, the SE80AX65 provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and speeds of 30-800 mm/s.
Yes, the SE80AX65 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact mounting footprint and interface of other ISO 15552 profile cylinders. Just ensure your setup accommodates the PT3/8 port and M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX65
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.