Airtac SE80 Standard Cylinder SE80BX100S
The AirTAC Airtac SE80 Standard Cylinder SE80BX100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX100S
The AirTAC SE80BX100S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 100 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies sensor placement along its three integrated grooves.
This specific configuration incorporates a SUS304 stainless steel rod (code B) for superior resistance in washdown or corrosive environments, alongside a built-in magnet (code S) for position detection. The piston travels at 30-800 mm/s, and its end-of-stroke impact is managed by a field-adjustable pneumatic cushion at both ends, allowing technicians to tune deceleration precisely for moving loads rather than relying on a fixed bumper.
Airtac SE80 Standard Cylinder SE80BX100S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX100S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX100S Is Used
Beverage Line Pusher
Drives carton diverters on a beverage bottling line, utilizing the 2513 N push force and SUS304 rod to withstand daily washdowns without pitting.
Pallet Stopping Gate
Acts as a heavy-duty stopping gate for inbound timber pallets, using the 100 mm stroke to cycle rapidly and absorb impact via its adjustable air cushions.
Press Ejection Arm
Ejects stamped metal parts from a hydraulic press, relying on the S magnet and DMSE electronic sensors to confirm full retraction before the next cycle.
Is the Airtac SE80 Standard Cylinder SE80BX100S the Right Cylinder?
Selecting this 80 mm bore makes sense when an application requires substantial thrust; stepping down to a 63 mm bore reduces the 0.5 MPa push to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. The SE80BX100S carries a PT3/8 port and an M20x1.5 rod thread, handling higher side loads than smaller variants, though any stroke exceeding 300 mm still necessitates an external guide to prevent rod-bearing bending.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 cylinders, matching standard mounting accessories like FA front flanges or TC centre trunnions. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not function as a lock; if the machinery must hold a vertical load without live air pressure, integrate a BSE rod lock or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX100S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80BX100S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and footprint as other ISO 15552 profile cylinders. You can reuse existing FA, FB, or TC mounting hardware and pair the built-in S magnet with AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.