Airtac SE80 Standard Cylinder SE80BX100SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX100SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX100SH
The AirTAC SE80BX100SH is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This specific configuration pairs a SUS304 stainless steel rod with a high-temperature FKM seal, extending the operating window from -20 to +150 C for rigorous washdown environments.
The 80 mm bore utilizes a PT3/8 port and a 25 mm rod with an M20x1.5 thread, engineered to absorb significant side loads. Integrated sensor grooves on three sides accept CMSE reed or DMSE electronic switches, enabled here by the built-in -S magnet for precise end-of-stroke detection. Field-adjustable air cushions at both ends allow technicians to tune deceleration, softening hard mechanical stops during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80BX100SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX100SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX100SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX100SH Is Used
Pharmaceutical Mixer Lifting
Raises and lowers heavy vessel agitators using 2513 N of thrust, with the SUS304 rod and FKM seal surviving high-temperature CIP washdown cycles without degrading.
Pallet Dispenser Gating
Actuates high-speed diverters and gate arms on packaging lines, utilizing the 100 mm stroke to swiftly reposition empty pallets during 30-800 mm/s cycling.
Injection Mold Platen Clamping
Provides auxiliary clamping force on mid-sized mold platens, using the adjustable end cushions to prevent shock damage when securing heavy tooling at stroke limits.
Is the Airtac SE80 Standard Cylinder SE80BX100SH the Right Cylinder?
Selecting this 80 mm bore makes sense when an application requires substantial thrust between the 63 mm class (1559 N push @0.5 MPa) and the 100 mm class (3927 N push @0.5 MPa). The 100 mm stroke provides compact extension for heavy clamping or lifting tasks. Because the FKM seal and SUS304 rod are specified, this model is purpose-built for food processing or chemical exposure where standard TPU seals and carbon steel rods would fail prematurely.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, matching standardized mounting interfaces like FA or LB without machining. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the machinery must hold a vertical load without live air pressure, integrate an external rod lock or pilot-operated check valve rather than relying on the cushion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX100SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. Thanks to the FKM Viton seal, it operates safely in temperatures up to 150 C.
Yes, the SE80BX100SH is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders of the same bore and stroke, reusing existing mounting hardware like foot or flange brackets without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX100SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.