Airtac SE80 Standard Cylinder SE80BX10SCA
The AirTAC Airtac SE80 Standard Cylinder SE80BX10SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX10SCA
The AirTAC SE80BX10SCA is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous duty. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a short 10 mm stroke for high-impact clamping or ejecting tasks. The SUS304 stainless steel rod provides excellent corrosion resistance, making it well-suited for washdown environments and humid production floors.
Unlike traditional tie-rod bodies, this cylinder features a square extruded aluminum barrel that mounts flush against machine frames, saving valuable space. The integrated magnet allows seamless positioning feedback via CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable pneumatic cushioning at both ends lets technicians fine-tune end-of-stroke deceleration, preventing harsh mechanical banging even during rapid cycling.
Airtac SE80 Standard Cylinder SE80BX10SCA Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX10SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX10SCA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX10SCA Is Used
Stamping Press Ejection
Uses the 2513 N push force to rapidly eject formed metal blanks from a stamping die within a 10 mm stroke, where the SUS304 rod withstands residual cutting fluid spray.
Carton Flap Folding
Delivers swift, short-stroke mechanical folding of heavy corrugated cardboard flaps on a high-speed packaging line, benefiting from the flush-mount profile barrel.
Bottling Line Diverter
Actuates a pivot arm to sort glass bottles on a conveyor, utilizing the CA clevis mount for smooth articulation and the DMSE sensor for cycle tracking.
Is the Airtac SE80 Standard Cylinder SE80BX10SCA the Right Cylinder?
Selecting this 80 mm bore is optimal when a 63 mm cylinder (providing 1559 N push at 0.5 MPa) lacks the power for heavy ejection, but a 100 mm bore (3927 N push) would be physically oversized. The CA single clevis mounting accessory accommodates pivoting articulations, while the PT3/8 port ensures adequate airflow for its 30-800 mm/s speed range. Because the stroke is only 10 mm, side-load stress on the rod bearing is minimal, though the robust 25 mm rod naturally handles high axial loads. Note that this standard SE cylinder relies on air pressure to move; it does not hold position pneumatically if air is lost, so a BSE rod lock variant is required for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX10SCA FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing identical mounting and port dimensions for drop-in retrofitting. However, it does not hold a load if air pressure is lost; for unpowered load holding, you must use a BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX10SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.