Airtac SE80 Standard Cylinder SE80BX150S
The AirTAC Airtac SE80 Standard Cylinder SE80BX150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX150S
The AirTAC SE80BX150S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous pneumatic tasks. Delivering 2513 N of push force at 0.5 MPa and a maximum output of 513 kgf at 1.0 MPa, it provides substantial thrust for demanding industrial cycles. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This specific configuration features a SUS304 stainless steel piston rod (code B) tailored for washdown and corrosive environments. Equipped with a built-in magnet (code S), it supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to dial in deceleration to soften hard end stops at operating speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80BX150S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX150S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX150S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX150S Is Used
Palletizer Strapping
Drives the strapping and sealing head on automated palletizers, utilizing the 2513 N push force to tension steel or plastic bands securely around heavy loads.
Pharma Washdown Gate
Actuates分流 gates in pharmaceutical tablet lines, where the SUS304 rod withstands daily chemical washdowns without surface degradation.
CNC Tooling Clamp
Secures heavy machining centers' tooling fixtures, using the 513 kgf maximum holding strength to prevent vibration during aggressive milling.
Is the Airtac SE80 Standard Cylinder SE80BX150S the Right Cylinder?
When sizing this 80 mm bore actuator, consider stepping down to the 63 mm bore if your load requires less thrust, as it offers 1559 N push at 0.5 MPa. If the application demands heavier cycling, moving up to the 100 mm bore yields 3927 N push at 0.5 MPa. Because this is a double-acting cylinder, it relies on live air pressure to maintain position; if air is lost or the valve centers, the piston will drift and cannot hold a load. For positive holding, an external rod lock like the BSE series is required.
This model uses a PT3/8 port and an M20x1.5 rod thread. At a 150 mm stroke, the 25 mm rod handles moderate side loading, but for any extended stroke over 300 mm, adding an external guide prevents rod-bearing bending. Being dimensionally interchangeable per ISO 15552, it serves as a drop-in replacement for other ISO 15552 cylinders, utilizing shared mounting hardware like FA front flanges or TC center trunnions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX150S FAQ
The SE80BX150S provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N. The absolute maximum push capacity is 513 kgf when operated at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting footprints with other ISO 15552 profile cylinders for easy retrofitting. The field-adjustable air cushion at both ends allows you to set the needle valve to decelerate the piston smoothly near the stroke end, though it is a damping device and not a position lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.