Airtac SE80 Standard Cylinder SE80BX175S
The AirTAC Airtac SE80 Standard Cylinder SE80BX175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX175S
The AirTAC SE80BX175S is a double-acting, single-rod ISO 15552 profile cylinder delivering a robust 2513 N push force at 0.5 MPa. It features a 175 mm stroke and a corrosion-resistant SUS304 stainless steel rod (material code B), making it highly suited for washdown or chemically exposed environments.
The extruded aluminum barrel omits external tie rods for a clean, compact footprint that mounts flush, while sensor grooves on three sides allow flexible placement of CMSE reed or DMSE electronic switches (enabled by the built-in -S magnet). Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, protecting mechanisms from hard impacts during high-speed 30-800 mm/s cycling.
Airtac SE80 Standard Cylinder SE80BX175S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX175S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX175S Is Used
Palletizer Flap Folding
Drives the mechanical flap-folding arms on a case palletizer, using its 2513 N push at 0.5 MPa to overcome carton resistance while the SUS304 rod shrugs off washdown.
Bottle Line Diverter
Actuates a high-speed diverter gate on a beverage bottling line, cycling at 30-800 mm/s with DMSE electronic sensors tracking the 175 mm stroke for precise routing.
Chemical Process Valve
Operates an automated process valve in a chemical plant, relying on the SUS304 stainless rod and adjustable air cushions to survive corrosive vapors and cushion heavy end stops.
Is the Airtac SE80 Standard Cylinder SE80BX175S the Right Cylinder?
This 80 mm bore provides 2513 N of push at 0.5 MPa. If your payload is lighter, stepping down to the 63 mm bore yields 1559 N of push, whereas moving up to the 100 mm bore provides 3927 N for heavier masses. Keep in mind that a standard SE cylinder will drift if air pressure is lost; if the application requires true position holding, you need a BSE rod lock or an external pilot-operated check valve.
With a 175 mm stroke, the Ø25 mm rod and M20x1.5 thread handle substantial loads, but for any stroke at or beyond 300 mm, you must use an external guide to prevent rod-bearing bending under side loads. Because it adheres to the ISO 15552 mounting interface, this cylinder serves as a drop-in dimensional replacement for comparable ISO 15552 profile cylinders without altering your existing mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX175S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
Yes. The SE80BX175S is dimensionally interchangeable per the ISO 15552 standard, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It uses a PT3/8 port and includes a built-in magnet for CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.