Airtac SE80 Standard Cylinder SE80BX200
The AirTAC Airtac SE80 Standard Cylinder SE80BX200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX200
The AirTAC SE80BX200 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa alongside a 2268 N retract pull. Its square extruded aluminum barrel omits external tie rods, yielding a completely flush outer surface that simplifies flush mounting and actively resists debris accumulation in harsh production cells. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in end-of-stroke deceleration, smoothly absorbing kinetic energy rather than relying on a fixed rubber bumper.
This specific SKU is built with a SUS304 stainless steel piston rod (option B), making it highly suitable for corrosive environments or washdown processing lines where a standard carbon steel rod would degrade. It operates at speeds from 30-800 mm/s via a PT3/8 port, and because it lacks the built-in magnet option (-S), it is optimized for purely mechanical drive sequences without position feedback.
Airtac SE80 Standard Cylinder SE80BX200 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX200
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX200 Is Used
CNC Lathe Bar Feeder
Drives heavy stock pushers into CNC spindles, utilizing the 2513 N extend force to overcome bar weight friction, while the SUS304 rod shrugs off cutting fluid splash.
Bottling Line Diverter Gate
Actuates high-speed routing arms on packaging conveyors, where the field-adjustable end cushions soften the 30-800 mm/s cycle stops to protect glass containers.
Washdown Pallet Stop
Functions as a heavy-duty pallet end-stop in food processing lines, leveraging the corrosion-resistant stainless steel rod to withstand daily high-pressure chemical washdowns.
Is the Airtac SE80 Standard Cylinder SE80BX200 the Right Cylinder?
When sizing this 80 mm bore, you can step down to the 63 mm bore for 1559 N push at 0.5 MPa, or step up to the 100 mm bore for 3927 N push at 0.5 MPa. Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve is centered; the piston will drift. For suspended or gravity-loaded vertical applications requiring fail-safe position holding, pair this cylinder with an external pilot-operated check valve or transition to the AirTAC BSE rod-lock variant. For an exact retrofit, match the 80 mm bore, 200 mm stroke, PT3/8 port, and your required ISO 15552 mounting accessory. At 200 mm stroke, side-load bending on the M20x1.5 rod bearing is minimal, but any unsupported load over 300 mm requires an external guide rail to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX200 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and speeds of 30-800 mm/s.
Yes, the SE80BX200 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with an 80 mm bore and 200 mm stroke, matching the PT3/8 port and M20x1.5 rod thread. Note that this specific SKU lacks a position-sensing magnet, so it is intended for mechanical drive cycles without CMSE or DMSE sensor feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.