Airtac SE80 Standard Cylinder SE80BX200S
The AirTAC Airtac SE80 Standard Cylinder SE80BX200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX200S
The AirTAC SE80BX200S is a double-acting, single-rod ISO 15552 profile cylinder delivering a robust 2513 N push force at 0.5 MPa. Engineered with a SUS304 stainless steel rod, it is specifically built for corrosive and washdown environments where standard carbon steel rods fail. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration.
This 80 mm bore unit features a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration via a set screw, protecting machinery from hard impacts during high-speed 30-800 mm/s cycling. It operates reliably across a 0.15-1.0 MPa pressure range with a PT3/8 port.
Airtac SE80 Standard Cylinder SE80BX200S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX200S Is Used
Chemical Washdown Diverter
The SUS304 stainless rod withstands corrosive CIP washdowns, while the 2513 N push force reliably actuates heavy stainless-steel diverter gates in fluid processing lines.
Pallet Case Erector
With a 200 mm stroke and 3518 N extending force at 0.7 MPa, it folds heavy corrugated cardboard blanks on automated packaging machinery without deflecting.
CNC Lathe Door Guard
The tie-rod-free extruded profile mounts flush to machine enclosures, using the -S magnet and DMSE sensors to confirm the safety door is locked before a CNC cycle starts.
Is the Airtac SE80 Standard Cylinder SE80BX200S the Right Cylinder?
Selecting this 80 mm bore provides a substantial 2513 N push at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push, whereas moving up to the 100 mm bore provides 3927 N. The 200 mm stroke is well within standard limits, but at this length you should evaluate side-load forces on the M20x1.5 thread and Ø25 mm rod; an external guide is recommended for heavy lateral loads. The SUS304 rod makes it ideal for food processing or chemical washdowns. Remember, a standard SE cylinder does not hold position unpowered—use a BSE rod lock variant if pneumatic failure must not cause drifting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX200S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with an absolute maximum push of 513 kgf at 1.0 MPa. It uses a PT3/8 port and an M20x1.5 rod-end thread.
Yes. The SE80BX200S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders using the same mounting footprint and PT3/8 port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.