Airtac SE80 Standard Cylinder SE80BX500
The AirTAC Airtac SE80 Standard Cylinder SE80BX500 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke500 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX500
The AirTAC SE80BX500 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 500 mm stroke. It operates on filtered air at 0.15-1.0 MPa, generating 2513 N of push force and 2268 N of pull force at 0.5 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement along its three integrated grooves.
This specific SKU utilizes a SUS304 stainless steel rod (code B) for superior resistance in corrosive or washdown environments. It lacks a built-in magnet, meaning external position sensing is not supported on this configuration. The field-adjustable pneumatic cushioning at both ends allows precise tuning to decelerate the 25 mm diameter rod smoothly near the stroke limits.
Airtac SE80 Standard Cylinder SE80BX500 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX500 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX500
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX500 Is Used
Palletizer Case Pusher
Uses the 2513 N push force and 500 mm stroke to index filled corrugated cartons onto a palletizing station in a high-speed packaging line.
Washdown Diverter Gate
Leverages the SUS304 stainless steel rod to actuate a flow diverter valve in a food processing facility without risking corrosion from daily chemical washdowns.
CNC Chip Conveyor
Employs the 500 mm stroke to push metal chip hoppers along a conveyor track, relying on the adjustable end cushions to soften stops at maximum speed.
Is the Airtac SE80 Standard Cylinder SE80BX500 the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore fits mid-to-heavy automation. If you need less force, the 63 mm bore offers 1559 N; if your load requires more, the 100 mm bore provides 3927 N. Because the 500 mm stroke creates a long unsupported lever arm, an external guide is strongly recommended to prevent rod-bearing bending under side loads. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement sharing standard mounting dimensions and PT3/8 ports with other ISO 15552 cylinders. Note that this plain SE model will drift if air pressure is lost; use a BSE rod lock for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX500 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The cylinder operates at speeds of 30-800 mm/s.
No, the adjustable air cushions only decelerate the piston near the end of the stroke and do not function as a brake. If air is lost or the valve is centered, the piston will drift. For position holding, use a BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.