Airtac SE80 Standard Cylinder SE80BX700SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX700SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke700 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX700SH
The AirTAC SE80BX700SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding washdown and high-temperature environments. It delivers a robust 2513 N push force at 0.5 MPa across a 700 mm stroke. Equipped with a SUS304 stainless steel rod and FKM Viton seals, this unit reliably operates in temperatures up to 150 C, resisting chemical degradation where standard TPU seals fail.
The extruded aluminum barrel eliminates external tie rods, presenting a smooth, flush-mounted profile that simplifies cleaning and prevents debris accumulation. Integrated sensor grooves on three sides allow flexible placement of CMSE reed or DMSE electronic switches. Field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to soften hard end stops during high-speed cycling.
Airtac SE80 Standard Cylinder SE80BX700SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX700SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX700SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX700SH Is Used
Medical Autoclave Doors
Leverages the 2513 N push force and FKM Viton seals to reliably actuate heavy sterilization chamber doors at sustained 150 C temperatures.
Bottling Line Diverters
The SUS304 stainless rod withstands daily chemical washdowns while the 700 mm stroke accurately gates glass containers on high-speed packaging lines.
Palletizer Ejectors
Uses the 3518 N thrust at 0.7 MPa to push heavy pallets off an accumulation zone, relying on the no-tie-rod profile to prevent debris buildup.
Is the Airtac SE80 Standard Cylinder SE80BX700SH the Right Cylinder?
This 80 mm bore provides 2513 N of push force at 0.5 MPa. If you need less force, the 63 mm bore offers 1559 N of push; if your load requires more, the 100 mm bore steps up to 3927 N. Because the SE80BX700SH uses a 700 mm stroke, the 25 mm rod and rod-bearing face bending moments under heavy side loads—an external guide is recommended to prevent premature seal wear. Remember that a standard SE cylinder drifts when air is lost; if your application must hold a vertical load without live pressure, specify a BSE rod lock variant. For drop-in retrofits, verify the 80 mm bore, 700 mm stroke, PT3/8 port, and ensure your mounting accessory matches the ISO 15552 interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX700SH FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end and does not function as a brake or lock. If the application requires position holding without live air pressure, an external rod lock or the AirTAC BSE variant is necessary.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX700SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.