Airtac SE80 Standard Cylinder SE80BX80S
The AirTAC Airtac SE80 Standard Cylinder SE80BX80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX80S
The AirTAC SE80BX80S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa and a maximum thrust of 513 kgf. It features an 80 mm bore, an 80 mm stroke, and a PT3/8 port. Equipped with a SUS304 stainless steel rod (code B), it is purpose-built to withstand corrosive environments and rigorous washdown duty without compromising mechanical integrity.
The extruded aluminum barrel design eliminates external tie rods, yielding a compact, flush-mounting footprint that resists debris buildup while maintaining the standardized ISO 15552 mounting interface. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration for high-speed 30-800 mm/s cycles, and the built-in magnet (-S) directly supports CMSE reed and DMSE electronic position sensing.
Airtac SE80 Standard Cylinder SE80BX80S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX80S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX80S Is Used
Palletizer Flap Control
Drives heavy cardboard flap folding mechanisms on automated palletizing lines, utilizing the 2513 N push force to overcome carton stiffness while the SUS304 rod endures dusty, high-cycle duty.
Beverage Washdown Diverter
Actuates flow diverter gates in food-grade bottling plants, where the SUS304 stainless rod provides critical resistance against harsh chemical washdowns and the 80 mm stroke provides rapid actuation.
Injection Mold Ejector
Pushes heavy injection-molded plastic parts out of stationary mold halves, relying on the 513 kgf maximum thrust and adjustable pneumatic cushions to prevent harsh end-stop impacts at high speeds.
Is the Airtac SE80 Standard Cylinder SE80BX80S the Right Cylinder?
Select this 80 mm bore actuator when an application requires substantial thrust, specifically 2513 N of push at 0.5 MPa. If your load demands less force, stepping down to the 63 mm bore yields 1559 N of push, whereas scaling up to the 100 mm bore provides 3927 N. Remember that this standard cylinder will drift if air pressure is lost or the valve is centered; it cannot hold a load mid-stroke. For position holding without live pressure, consider an external pilot-operated check valve or the AirTAC BSE rod lock variant.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, utilizing identical mounting hardware and footprint. This specific configuration includes a PT3/8 port, a 25 mm SUS304 stainless steel rod with an M20x1.5 thread, and a built-in sensor magnet for CMSE/DMSE switches. The 80 mm stroke is well below the 1500 mm maximum standard stroke, keeping it readily available for fast RFQ turnaround.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX80S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with an absolute maximum push of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, serving as a drop-in replacement for other ISO 15552 profile cylinders using shared mounting accessories. However, it is a standard double-acting cylinder; the adjustable air cushion only decelerates the piston near stroke end and does not act as a brake. It cannot hold a load if air is lost or the valve is centered.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.