Airtac SE80 Standard Cylinder SE80X10
The AirTAC Airtac SE80 Standard Cylinder SE80X10 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X10
The AirTAC SE80X10 is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke high-force tasks. It delivers a substantial 2513 N push force at just 0.5 MPa, extending a 10 mm stroke via a Ø25 mm rod with an M20x1.5 thread. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames while retaining the standardized ISO 15552 footprint for seamless retrofitting.
This specific SKU is configured without a built-in magnet, meaning it does not support direct CMSE or DMSE position sensing out of the box. Deceleration is handled by field-adjustable air cushions at both ends, allowing technicians to dial in end-of-stroke damping to match the 30-800 mm/s operating speed, ensuring the piston stops smoothly without harsh metal-on-metal impact.
Airtac SE80 Standard Cylinder SE80X10 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X10 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X10
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X10 Is Used
Injection Mold Clamping
Provides 2513 N of push force at 0.5 MPa to secure injection mold halves during material injection, utilizing the 10 mm stroke to lock the tooling rapidly without excessive travel.
Press Brake Stopping
Acts as a hard mechanical stop for metal press brakes, using the high force capacity and adjustable end cushions to absorb the impact of heavy steel sheet bending at high speeds.
Spot Welding Fixturing
Holds automotive sheet metal panels in place for spot welding guns, where the smooth tie-rod-free extruded barrel prevents slag buildup and allows easy mounting in dense robotic weld cells.
Is the Airtac SE80 Standard Cylinder SE80X10 the Right Cylinder?
Choosing the SE80X10 makes sense when a machine needs high clamping power within a very tight spatial envelope. If you need to step the force down, the adjacent 63 mm bore offers a 1559 N push at 0.5 MPa, which avoids overpowering delicate components. If you require even greater thrust, the 100 mm bore provides 3927 N at 0.5 MPa. Because this 10 mm stroke is extremely short, rod-bearing bending and side-load risks are minimal compared to longer strokes, but always verify lateral loads are kept within ISO 15552 guidelines.
As a standard double-acting cylinder, this model relies on continuous air pressure to hold its position; it does not feature a rod lock, so the piston will drift if air is lost or the valve is centered. For applications requiring true position holding without live pressure, consider the BSE rod-lock variant. To replace an existing cylinder, match the 80 mm bore, 10 mm stroke, PT3/8 port, and basic mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X10 FAQ
The SE80X80 delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
This specific SE80X10 SKU is manufactured without a built-in magnet (-S). Therefore, it cannot directly support AirTAC CMSE reed or DMSE electronic sensors without modification. If position feedback is required, select the SE80X10S variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.