Airtac SE80 Standard Cylinder SE80X100CB
The AirTAC Airtac SE80 Standard Cylinder SE80X100CB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100CB
The AirTAC SE80X100CB is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving sensor grooves open on three sides for flexible positioning.
This 80 mm bore unit features a field-adjustable air cushion at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw rather than relying on a fixed bumper. Configured here with a CB double clevis mounting accessory, it is built to handle articulated pivot loads while operating at speeds between 30 and 800 mm/s.
Airtac SE80 Standard Cylinder SE80X100CB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100CB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100CB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100CB Is Used
CNC Lathe Bar Feeder
Pushes raw bar stock into the lathe spindle with 2513 N of force, utilizing the CB clevis to articulate smoothly with the feeder carriage.
Palletizer Flap Folder
Deploys 100 mm of stroke to fold major top flaps on corrugated boxes, relying on the adjustable cushion to soften high-speed end stops.
Injection Mold Ejector
Drives an auxiliary ejection arm inside an injection molding cell, where the tie-rod-free extruded barrel resists coolant mist and fits tight tooling bays.
Is the Airtac SE80 Standard Cylinder SE80X100CB the Right Cylinder?
Select this 80 mm bore when an application requires 2513 N of push at 0.5 MPa. If your load is lighter, stepping down to the 63 mm bore yields 1559 N of push; conversely, scaling up to the 100 mm bore provides 3927 N of thrust. Because this is a plain double-acting cylinder, it will drift if air pressure is lost or the valve is centered—use an AirTAC BSE rod lock for positive holding.
This SKU omits the -S magnet, so it cannot host CMSE or DMSE position sensors without modifying the build. As a dimensionally interchangeable ISO 15552 component, it serves as a drop-in retrofit for other ISO 15552 cylinders, sharing standard mounting hardware and port sizes (PT3/8).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100CB FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The standard operating speed ranges from 30 to 800 mm/s.
No, the adjustable air cushion only decelerates the piston near the end of the stroke; it does not lock or hold the load. If your application requires position holding without live air pressure, you should integrate an AirTAC BSE series rod lock or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.