Airtac SE80 Standard Cylinder SE80X100FA
The AirTAC Airtac SE80 Standard Cylinder SE80X100FA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100FA
The AirTAC SE80X100FA is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, utilizing an 80 mm bore and a 100 mm stroke. The FA front flange mounting provides a rigid front-face attachment, ideal for resisting high downward shear loads in vertical presses.
This model features a square extruded aluminum barrel without external tie rods, which keeps the body compact and flush-mountable while preventing corrosion traps. The field-adjustable air cushion at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard mechanical stops at high cycling speeds. Note that this specific SKU lacks a built-in magnet, so it is not wired for CMSE or DMSE position sensing out of the box.
Airtac SE80 Standard Cylinder SE80X100FA Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100FA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100FA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100FA Is Used
Metal Stamping Press
Provides the 2513 N push force required to actuate a medium-tonnage stamping die set, with the FA flange ensuring the cylinder body remains totally rigid under high vibration.
Pallet Diverting Gate
Drives a heavy structural diverting arm on a packaging conveyor, where the 100 mm stroke rapidly redirects filled pallets without bouncing at the end of travel due to tuned cushioning.
Injection Mold Ejection
Mounts via the front flange to securely push an injection molding ejector plate, utilizing the 80 mm bore to deliver consistent stripping force for dense plastic parts.
Is the Airtac SE80 Standard Cylinder SE80X100FA the Right Cylinder?
If you need to step down from this 80 mm bore, the 63 mm variant offers 1559 N of push at 0.5 MPa, saving space and air consumption. If your application demands more thrust, stepping up to the 100 mm bore yields 3927 N at 0.5 MPa. Remember that a standard SE cylinder relies on live air pressure to hold its position; if pneumatic supply is lost, the piston will drift, so integrate a BSE rod lock for fail-safe load holding.
Because this unit uses the FA front flange, ensure your mounting plate is machined true to prevent rod-binding. The PT3/8 port and M20x1.5 rod thread handle substantial flow and side-load capacity. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to drop it into existing tooling jigs without redesigning the footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100FA FAQ
This 80 mm bore cylinder delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. It uses a PT3/8 pneumatic port and a 25 mm rod with an M20x1.5 thread.
Yes, the SE80X100FA is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, pilot dimensions, and PT3/8 port locations as other standard profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.