Airtac SE80 Standard Cylinder SE80X100S
The AirTAC Airtac SE80 Standard Cylinder SE80X100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100S
The AirTAC SE80X100S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. It features an 80 mm bore, a 100 mm stroke, and a PT3/8 port, making it a prime choice for heavy-duty pneumatics. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes the -S magnet code, enabling seamless integration with AirTAC CMSE reed and DMSE electronic position sensors via the integrated three-sided sensor grooves. Furthermore, the field-adjustable air cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a simple screw, protecting payloads from harsh mechanical impacts.
Airtac SE80 Standard Cylinder SE80X100S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100S Is Used
Palletizer Case Pusher
Uses the 2513 N push force at 0.5 MPa to positively index filled corrugated cartons onto a palletizing turntable, relying on the 100 mm stroke to clear the conveyor lane during retraction.
Injection Mold Extractor
Extracts heavy molded plastic automotive interior panels from a press, utilizing the field-adjustable air cushion to gently decelerate the 80 mm bore rod before it reaches the rear endcap.
Press Brake Material Stop
Positions a hardened steel back-gauge stop for sheet metal bending, where the integrated -S magnet triggers a DMSE electronic sensor to confirm the guide arm is fully retracted before the brake cycles.
Is the Airtac SE80 Standard Cylinder SE80X100S the Right Cylinder?
Selecting the SE80X100S places you in a heavy-duty class, generating 2513 N push and 2268 N pull at 0.5 MPa. If your payload is lighter, you can step down to the 63 mm bore, which provides 1559 N of push force. Conversely, if your mechanism requires extreme thrust, stepping up to the 100 mm bore yields 3927 N at the same pressure. Because this is a double-acting cylinder, it relies on continuous air pressure to maintain position; if air is lost or the valve centers, the piston will drift, meaning applications requiring dead-stop holding must pair it with a BSE rod lock or external pilot-operated check valve.
As a true ISO 15552 cylinder, this model is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing a drop-in retrofit using standardized mounting hardware like FA front flanges or TC centre trunnions without altering your machine footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, and the absolute maximum push force is 513 kgf at 1.0 MPa. It operates on filtered air between 0.15 and 1.0 MPa, with a speed range of 30-800 mm/s.
Yes. The SE80X100S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders. You can reuse your existing standardized mounting accessories and PT3/8 pneumatic plumbing without redesigning the machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.