verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80X100SCA

The AirTAC SE80 Standard Cylinder SE80X100SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke100 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$134.68 $142.18Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE80 Standard Cylinder SE80X100SCA

The AirTAC SE80X100SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic tasks. It provides a robust 2513 N push force at 0.5 MPa and utilizes a Ø25 mm piston rod with an M20x1.5 thread. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 footprint.

This specific configuration includes a CA single clevis mounting accessory for pivoting articulation and an integrated -S magnet for position sensing. The magnet is fully compatible with AirTAC CMSE reed and DMSE electronic switches, allowing precise end-of-stroke verification. Furthermore, the cylinder incorporates field-adjustable air cushioning at both ends, enabling technicians to fine-tune deceleration and eliminate hard end-stop impacts during high-speed 30-800 mm/s operations.

Airtac SE80 Standard Cylinder SE80X100SCA Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80X100SCA
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke100 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80X100SCA

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80X100SCA Is Used

straighten

Metal Stamping Press

Drives a heavy-duty stamping die with 2513 N of push force at 0.5 MPa, utilizing the CA clevis to accommodate swing arc during the ram descent.

warehouse

Pallet Dispenser

Pushes empty pallets into a staging lane, relying on the integrated -S magnet and DMSE sensors to confirm stack discharge at high cycle rates.

conveyor_belt

Heavy Package Diverter

Actuates a routing gate on a high-speed logistics line, using the adjustable end cushions to soften the 100 mm stroke impact at 800 mm/s.

Is the Airtac SE80 Standard Cylinder SE80X100SCA the Right Cylinder?

Selecting the SE80X100SCA is appropriate when your mechanism requires substantial thrust, specifically 2513 N of push force at 0.5 MPa (or 3518 N at 0.7 MPa). If your load demands less force, stepping down to the 63 mm bore yields 1559 N of push, which may save space and air consumption. Conversely, if you need greater power, stepping up to the 100 mm bore provides 3927 N of push at 0.5 MPa.

Because this is a double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston will drift. For applications requiring true position holding without live air, consider the BSE rod-lock variant. As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct replacement for other ISO 15552 cylinders, matching the 80 mm bore, 100 mm stroke, PT3/8 port, and CA clevis mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80X100SCA FAQ

The SE80X100SCA provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.

Yes, the SE80X100SCA is dimensionally interchangeable per ISO 15552 standards. It shares the exact 80 mm bore, 100 mm stroke, PT3/8 port, and CA single clevis mounting dimensions, making it a direct retrofit for other ISO 15552 profile cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80X100SCA

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE80X100SCA and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.