Airtac SE80 Standard Cylinder SE80X10S
The AirTAC Airtac SE80 Standard Cylinder SE80X10S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X10S
The AirTAC SE80X10S is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke heavy-duty actuation. It generates 2513 N of push force at 0.5 MPa, utilizing a robust Ø25 mm piston rod with an M20x1.5 thread. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes.
Equipped with a built-in magnet (-S), this unit interfaces directly with AirTAC CMSE reed and DMSE electronic position sensors. The field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to prevent harsh end-stop impacts, even when cycling at speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X10S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X10S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X10S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X10S Is Used
Press Die Ejection
Provides 2513 N of push force at 0.5 MPa to eject stamped parts from compact progressive press dies over a rapid 10 mm stroke.
Diverter Gate Control
Powers heavy pneumatic diverter gates on packaging conveyor lines, using the integrated -S magnet to trigger DMSE electronic sensors for precise routing.
Robotic Gripper Actuation
Acts as a robust short-stroke actuator for large robotic grippers, handling substantial clamping resistance with its Ø25 mm hard-chrome rod.
Is the Airtac SE80 Standard Cylinder SE80X10S the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore fits high-force tasks. If your load is lighter, the 63 mm bore offers 1559 N push, while stepping up to the 100 mm bore provides 3927 N for heavier resistance. The 10 mm stroke is highly compact, but if your mechanism drifts when air is exhausted, note that the standard SE cannot hold a load without live pressure—consider a BSE rod lock for fail-safe positioning. For ISO 15552 retrofits, match the 80 mm bore, 10 mm stroke, PT3/8 port, and -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X10S FAQ
The SE80X10S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features an 80 mm bore, a Ø25 mm rod, an M20x1.5 rod-end thread, and a PT3/8 port.
Yes, the SE80X10S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing foot, flange, or trunnion mounting hardware designed for ISO 15552 profile cylinders without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.