Airtac SE80 Standard Cylinder SE80X115
The AirTAC Airtac SE80 Standard Cylinder SE80X115 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 115mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke115 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X115
The AirTAC SE80X115 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force and 2268 N of pull force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a highly compact body that resists corrosion and mounts flush against machine frames.
This 80 mm bore unit features field-adjustable air cushioning at both stroke ends, allowing technicians to dial in end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. Because this specific SKU lacks the -S magnet code, it is not equipped from the factory for AirTAC CMSE or DMSE electronic position sensing.
Airtac SE80 Standard Cylinder SE80X115 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X115 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X115
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X115 Is Used
Corrugated Box Forming
Delivers 2513 N of push force at 0.5 MPa to cleanly fold and square heavy corrugated carton blanks on continuous packaging lines.
Press Brake Tooling
Provides the 2268 N retract force needed to position and hold lower press brake dies accurately before clamping.
Injection Mold Ejection
Drives 115 mm of travel to eject dense plastic parts from injection molds, using adjustable cushioning to soften hard end stops.
Is the Airtac SE80 Standard Cylinder SE80X115 the Right Cylinder?
If your application requires slightly less thrust, stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa, whereas moving up to the 100 mm bore provides 3927 N. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is exhausted or a valve centers, the piston will drift and cannot hold a load. For true drop-in compatibility with other ISO 15552 cylinders, match the 80 mm bore, 115 mm stroke, PT3/8 porting, and your required mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X115 FAQ
At 0.5 MPa, the SE80X115 generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE80X115 is dimensionally interchangeable per ISO 15552 mounting interface dimensions, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders without altering your existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X115
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.