Airtac SE80 Standard Cylinder SE80X130
The AirTAC Airtac SE80 Standard Cylinder SE80X130 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X130
The AirTAC SE80X130 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 80 mm bore unit features a 25 mm piston rod and PT3/8 ports, utilizing field-adjustable air cushioning at both ends to decelerate loads smoothly. Note that this specific SKU is configured without a sensor magnet, so it does not directly support CMSE or DMSE position switches without modification.
Airtac SE80 Standard Cylinder SE80X130 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X130 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X130
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X130 Is Used
Injection Moulding Extraction
Leverages the 2513 N extend force to positively extract heavy plastic parts from injection moulding tools, using the 130 mm stroke to clear the press platen safely.
Corrugated Box Forming
Drives the folding mechanism on heavy-duty corrugated carton erectors, where the 80 mm bore output securely creases thick double-wall board without stalling.
Automotive Panel Stamping
Acts as a heavy-duty clamping actuator in multi-stage sheet metal stamping lines, holding panels flat against jigs during robotic welding.
Is the Airtac SE80 Standard Cylinder SE80X130 the Right Cylinder?
Selecting this 80 mm bore provides 2513 N of push at 0.5 MPa; if your application requires less force, the 63 mm bore offers 1559 N, while stepping up to the 100 mm bore yields 3927 N. Because this SKU lacks the -S magnet, you must add external physical sensors or select an -S variant if position feedback is required.
The SE80X130 is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing you to retrofit existing machinery using the same mounting hardware. Remember that a standard double-acting cylinder drifts when air pressure is removed; if your process demands strict load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X130 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum rated push force is 513 kgf at 1.0 MPa.
Yes, the SE80X130 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts using the same footprint, provided you match the PT3/8 port and 25 mm rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.